Latest innovations and products in the interiors section of the construction industry.

New Makita Twin 18v (36v) 40mm SDS-MAX rotary demolition hammer matches mains performance

Makita has launched its first ever cordless SDS-MAX Rotary Demolition Hammer, featuring all the power and performance of a mains machine whilst benefitting from the freedom and manoeuvrability that a battery-operated tool has to offer. The mighty DHR400ZKU is powered by two 18v LXT batteries giving 36v power from the brushless motor for extended run-time and increased power.

As with the popular HR4013C mains machine, the new Makita DHR400ZKU Twin 18v SDS-MAX Rotary Demolition Hammer will punch a 40mm hole into concrete, will run up to 500rpm and will generate up to 2,900 blows per minute with 8.0 Joules of impact energy.

Makita’s AVT – Anti-Vibration Technology – is featured in this model which gives the hammer drilling vibration rating – when hammer drilling into concrete – of just 5.0m/s². This rugged 2-mode machine – rotary drilling with hammer action and hammer action-only for chiselling – has the easy-to-operate mode change switch positioned conveniently on top of the motor body ahead of the vibration-reducing rear grip handle. With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the DHR400ZKU can also be used with the trigger controlling chiselling for intermittent work. A further position of the mode control allows the bit angle to be set as required.

The DHR400ZKU also benefits from the new Makita Auto-Start Wireless System (AWS) which allows the tool to automatically connect to compatible Makita dust extractors. A unique chip will come with every machine that features AWS allowing the user to pair it up with the selected dust extractor. Once paired, the dust extractor will automatically start once the trigger on the hammer is pulled.

This new machine also has the Soft Start feature which accelerates the motor into action even if the trigger is pulled fully home from off. In drilling mode this reduces the sudden torque load on start up. When operating, the torque limiter connected to the side handle will cut the motor drive should the drill bit snag thus providing further operator protection. The soft no load function automatically cuts the motor speed during idling to reduce vibration generation which contributes to this hard-working Makita rotary hammer. An electric brake and useful LED job light are also featured.

The DHR400ZKU is available as a body only machine and comes with a carry case.

For more news and product information about Makita UK please visit www.makitauk.com. Follow us on Twitter @MakitaUK, Facebook.com/makitauk and google.com/+makitauk
/0 Comments/by

Titon introduces innovative new controller and ventilation accessories

Titon has launched a comprehensive new range of accessories for use with its MVHR units. These include Titon’s new aura-tTM touchscreen controller, Anti-Vibration Mounting Kits, First Fix Solutions and Condensate Drain – each of which has been developed as part of the company’s ongoing commitment to producing the latest, most advanced ventilation systems on the market.

The new aura tTM is a simple yet striking backlit touchscreen controller for Titon’s range of MVHR units. The next evolution of Titon’s renowned aurastat® control, the device is easy to operate and can be used for programming or commissioning the company’s Q Plus range, as well as managing ventilation speeds. It has been designed for use with Titon’s high end ‘B’ model, with the HMB version coming out in summer 2018.

Elsewhere, Titon’s new Anti-Vibration (AV) Mounting Kits utilise specifically designed brackets, which isolate the MVHR unit from the wall. This helps to reduce any low levels of vibration-induced noise from being transmitted to the mounting structure. The brackets match the construction, quality and finish of Titon’s HRV Q Plus range, without obstructing any subsequently attached ducting.

Each Mounting Kit uses four rubber AV bobbins, which have been specifically selected for optimum performance, while the bracket design ensures the unit is kept close to the mounting surface.

Compatible with Titon’s HRV 1.75 – 10.25 Q Plus units, First Fix Solutions make installation of the ducting from the ceiling void to the ventilation unit faster and easier, while providing a high quality finish and appearance. Designed for use with Titon’s 90° elbows, First Fix Solution products are available in two sizes, the smallest of which has the same face area as the top of the unit, ensuring the ducting travels directly to the ports in the first fix. This option requires the use of Ø150 round to round elbows in the ceiling void due to the closeness of the ports.

Alternatively, the larger First Fix Solution is the same width as the unit, but greater in depth – allowing the use of Ø150 round to rectangular 220 x 90mm elbows, and therefore can be fitted in a lower ceiling void. (The 90° elbows are not sold as part of the kit and should be purchased from Titon separately.)

Finally, Titon’s new Condensate Drain Cover has been developed to conceal the service pipe on the underside of Titon’s HRV units, improving the overall aesthetic, while still being easy to remove if required. There are three sizes available, designed to fit HRV 1.25 Q Plus to HRV 1.35 Q Plus, HRV 1.75 Q Plus through to HRV 3 Q Plus and HRV 10M Q Plus to HRV 10.25M Q Plus respectively.

Titon

Each cover has a depth of 74mm, within which the drainage pipe must be installed in order for the product to fit the ventilation unit. The drainage trap cannot be fitted within this cover void, so must be located in a suitable, alternative position.

Further details about the new MVHR accessories can be found at: http://www.titon.co.uk/pages/ventilation-systems/mvhr-accessories.
For more information about Titon and its comprehensive range of whole house ventilation products and window & door hardware, please visit: www.titon.co.uk.
/0 Comments/by

Atkinson & Kirby launches its new flooring ranges

Leading flooring specialist, Atkinson & Kirby launches its new trend led flooring ranges, including Homeland, Winter Desert, Organic Future and Modern Revival.

The first trend, Homeland, encapsulates the growing desire to embrace history in a contemporary lifestyle. This trend is about stripping things back, colours are mid to dark wood tones, materials are concrete, and timber and finishes are weathered.

Winter Desert focuses on handcraft and authentic design, featuring earthy natural tones and deep textures. Conversely, Organic Future’s tones are light oak, ash and maple with strong dark wood contrasts, smooth mattes and chalked greys.

Finally, Modern Revival is all about looking back, taking the best of past design, featuring patterns such as herringbone and chevron.

Zara Prescott, Communications Executive, said “We are very excited to showcase our new flooring ranges. Trends are constantly evolving and moving forward, so it’s our job to seek out the next big thing. Our new trend led ranges give homeowners a wide variety of style and designs to choose from, whilst maintaining the high quality and value our customers expect.”

For more information on Atkinson & Kirby and the range of products available, call 01695 573234 or simply visit www.akirby.co.uk
/0 Comments/by

Ariston water heaters combine efficiency and ease of use

(Image left to right: Andris Lux Eco, Andris Lux and ST 100)

Ariston’s extensive range of hot water heaters are suitable for a wide array of applications, with the company offering unvented and vented products – each of which are easy to install and operate. All Ariston water heaters boast an incredibly high-quality construction, utilising copper heating elements for advanced durability. Plus, the premium units in the range also benefit from the latest technology for optimum energy efficiency.

The flagship product in Ariston’s hot water portfolio is the Andris Lux Eco. This small unvented electric water heater encompasses leading Italian design, energy efficiency, durability, usability and safety. This premium model also boasts new features, including anti-legionella and anti-overheating functions.

Available in 10, 15 and 30-litre models, each with a 2.5kW element, Andris Lux Eco is perfect for a variety of locations, including commercial properties, building sites, kitchens, bathrooms or offices.

Complementing the Andris Lux Eco is its sister product, the Andris Lux. Another compact electric water heater, this unit is fully compliant with the latest ErP legislation (with units rated up to ‘A’ class), and available in three over-sink and four under-sink versions respectively. The 2kW and 3kW under-sink models have capacities of 10 and 15 litres, while the 3kW over-sink units are available with capacities of 10, 15 and 30 litres.

Elsewhere, Ariston’s water heating range also includes the 5L Piccolo – a wall mounted electric point of use unit, ideal for occasional use areas, such as kitchens, loft conversions and cloak rooms where there is limited space.

Finally, another option perfect for areas with limited space is the wall-hung ST 100. Compact and powerful, this 100-litre cylinder provides hot water at mains pressure. Compact, functional and long-lasting, the unit features an anti-corrosion system that further ensures durability.

 

Commenting on the range, Alex Boweren, Product Manager at Ariston, said “Our hot water heaters have been developed with end user comfort and reliability in mind, while complying with all necessary standards and legislation. Plus, thanks to extensive research and development, our premium units even have the capability to prevent legionella from forming, giving it additional health and safety credentials. So, with a wide range of sizes and capacities available, there is a water product available for any type of project.”

Ariston Thermo UK, which is part of the Ariston Thermo Group, is a manufacturer of domestic heating, hot water and renewable products. With over 20 years of experience in the UK, Ariston Thermo is a worldwide leading company in the heating and water heating industry.

For more details about Ariston and its range of boilers, controls, water heaters and other products, visit: www.ariston.co.uk. Follow @AristonUK on Twitter.
/0 Comments/by

Rinnai’s Infinity hot water heating range – ideal for LPG use

Rinnai offers what is said to be the most energy efficient and cost-effective range of LPG-compatible A-rated eco-labelled continuous flow hot water heating products for any type of site or application.

The Rinnai Infinity range includes the 16i (36.8kW output giving 16 litres of useable hot per minute) and the 17e for external mounting (29.7kW output giving 17 litres of hot water per minute) – condensing models within the range can deliver up to 107% net thermal efficiency.

For heavy-duty applications the Infinity HDC1600i/e produces the lowest NOx emissions on the market – below 20 ppm NOx. The HDC1600i Low NOx can boost thermal efficiency up to 108% (based on net calorific value) and can keep to more than 97% even in the minimal heat LPG.

The Infinity HDC1200 models also achieve energy performance of 107% net thermal efficiency while the larger HDC1500 internal and external models turn in 105% net thermal efficiency.

The Rinnai Infinity Low NOx HD55i internal water heater is a room sealed, wall hung, LPG or natural gas fired continuous flow water heater. Capable of supplying in excess of 780 litres @ 50ºC degrees rise per hour, while producing less than 20 ppm NOx, this unit combines environmental cost efficiencies and quality product offering. Up to 25 units can be cascaded to supply any specification.

LPG users can also take advantage of Rinnai’s Bespoke Package Design, created to provide better on-site efficiency and is supplied to site in bundles. The package also includes scale protection options to maximise system efficiency.

Another innovation from Rinnai is the Infinity Solo condensing low NOX water heater – this is the first Rinnai product for the UK to combine the advanced technology of its wall mounted continuous flow water heaters with a stainless-steel storage cylinder in one compact unit, boosting recovery rates of as little as 19 minutes and low standing losses. This system is ideal for light commercial requirements where services limit the use of continuous flow.

Comments Chris Goggin, Associate Director, Rinnai UK: “Contractors, Installers, site owners and end users can rest assured that these units, when used with LPG, offer the best energy savings and performance available for a hot water system. LPG is one of the most energy efficient forms of fuel available now, and our units take full advantage of their benefits.”

For more information on the RINNAI product range visit www.rinnaiuk.com

/0 Comments/by

Evinox team of CIBSE Certified Heat Network Consultants expands

Evinox has added to its CIBSE certified Technical and Design team, with Design Engineer Arturs Kokins becoming the latest to successfully complete the CIBSE Heat Networks Code of Practice course, passing his final exam with flying colours.

The CIBSE Heat Network qualification is recognised across the industry and covers a broad spectrum of considerations for communal and district heating systems, demonstrating the depth of knowledge Evinox can offer to their customers in the design of heat network systems.

Arturs originally joined Evinox in early 2017 as a Graduate Engineer, with an MEng (Hons) Mechanical Engineering degree, and has since developed his skills and gained valuable experience working on a number of key projects. These include managing bespoke testing with BSRIA (Building Services Research and Information Association) for a large development in London where Evinox is supplying heating and cooling units. He was also involved in Evinox successfully completing testing under the new BESA (British Engineering Services Association) UK Standard for Heat Interface Units, for which the Evinox ModuSat (XR) HIU achieved excellent results and is currently one of only five manufactures to have officially published its results on the BESA website, something the company is very proud of.

“Arturs is a perfect example of what can be achieved by investing in people and promoting their growth within a business,” comments Helen Gibbons, Evinox Technical and Design Manager. “He is a highly valued member of the team at Evinox, and we are delighted to employ a Design Engineer of Arturs calibre.”

Evinox offers developers, consultants and specifiers a broad range of design support services for district and communal heating projects, including HIU sizing and selection; hydraulic system guidance and advice; and complete plant room system and distribution pipework design, where required.

Please contact Evinox on 01372 722277 or complete the contact form on www.evinoxenergy.co.uk to find out more about our Design Services or BESA tested Heat Interface Unit range.
/0 Comments/by

Titon introduces inline Mixed Flow Fan

Titon has introduced the new, high performance inline Mixed Flow Fan range, which is suitable for bathrooms, kitchens and other residential applications. Capable of supplying or extracting air, depending on individual requirements, the fan can be fitted in a loft or ceiling. Available in diameters of 100mm, 125mm, 150mm and 160mm, the new unit also boasts three speeds and has been designed with small installers and end users in mind.

Simple to install and maintain, the Inline Mixed Flow Fan will be available from May 2018, and is ideal for removing internal condensation and eliminating the potential for mould growth within a home. The powerful in-duct mounted mixed flow fan is also capable of operating at higher working pressures in applications requiring high airflows, while keeping noise levels to a minimum.

In addition, the Inline Mixed Flow Fan offers ingress protection to IP55, complying with BS EN 60529 and ensuring sealing effectiveness of electrical enclosures against intrusion from dirt and foreign bodies. Plus, each fan has a high quality, ball bearing motor, as well as an overrun timer and LS live switching.

Commenting on the new product offering, Lee Caulfield, UK Sales Director at Titon, said: “We have introduced the Inline Mixed Flow Fan range to extend our extract ventilation portfolio. Previously, we only had a 125mm, third party model; now we have a full range of our own, which ventilates to an efficient level with minimal noise.”

Compatible with both rigid and flexible ductwork, all Inline Mixed Flow Fans are supplied with a one-year manufacturer’s guarantee as standard.

For more information about Titon and its comprehensive range of domestic ventilation products, please visit: www.titon.co.uk
/0 Comments/by

Installer 2018: Rinnai showcases continuous flow water heating for domestic and light commercial installations

Rinnai will be featuring its comprehensive range of energy efficient continuous flow gas-fired hot water heating products and systems at this year’s Installer Show. The Rinnai range is ideal for all sizes and types of applications – from domestic sites right up to the biggest commercial/industrial projects.

Visitors to the Rinnai Stand will be able to view products for domestic and light commercial sites – the 11i, the 16i and the K26. These products are ideal for light commercial use – hairdressers, barbers, restaurants, leisure clubs, schools catering, retail sites and anywhere that constant hot water ‘on-demand’ is needed.

Rinnai’s Infinity Plus range is for larger sites – caravan parks, health clubs etc –where there is a need for instant response to demand without paying the penalty of storing hot water.

Rinnai’s technically advanced condensing hot water heaters are precision engineered to provide simple, effective solutions for all types of commercial applications from caravan parks, restaurants and laundries to factories and office buildings as well as social and domestic housing projects. The units are renewable-ready (suitable for use as a temperature booster for solar thermal and heat-pump).

Rinnai offer a complete design and selection survey to assist with any domestic or commercial project.

Rinnai personnel will be available throughout INSTALLER 2018 to help with any visitor enquiries, alternatively information can be found at www.rinnaiuk.com
/0 Comments/by

Rinnai hot water – the Solo Stored range

Rinnai, the world-renowned innovator for every possible type of commercial site, has revolutionised the supply and delivery of hot water units and systems since the launch of its fully electronically-controlled gas-fired continuous flow product ranges.

One major part of the Rinnai Infinity condensing water heaters is the Solo range – a highly efficient Heavy-Duty gas-fired recirculatory water heater with a completely insulated stainless steel storage cylinder.

The combination of continuous flow units with a storage cylinder for pre-heated hot water allows for periods of peak hour use. This is of importance at those sites where limited gas services may dictate the use and application of water heating systems. The Rinnai Solo answers this problem – with system efficiency, ease of installation and end-user satisfaction.

Rinnai’s Infinity Solo low NOX water heaters can be used for the ‘Direct to Outlet’ system, and secondary return systems. Infinity Solo will deliver a constant output temperature of 60°C or higher, ensuring stored water is at levels that significantly reduce any risk of legionella proliferation.

The design parameters of this product – it is all in one compact footprint – empowering specifiers, designers, installers and engineers to benefit from unique Rinnai technology in applications it was once not previously possible.

For instance, the Infinity Solo has 35kW, 37kW and 54kW sized heat engines, ensuring sites with a smaller gas meter can readily use this technology. The larger Infinity Solo model will also act as a high-efficiency alternative to gas fired storage appliances that still exist in today’s market and can be easily installed on a ‘like for like’ basis where plant room services are concerned.

The cylinder is stainless steel, and this reduces the weight compared to glass lined models, and it makes transportation and installation a lot easier. As well as the difference in weight, the cylinders also have extremely low heat loss figures (as low as 1.41kW/h day), so the user pays less to maintain the heat within the tank.

One other benefit of the Infinity Solo using a stainless-steel cylinder is that the life expectancy of the material is far greater than that of a glass-lined equivalent as glass can suffer from thermal shock causing it to crack after a period of time.

Certain Infinity Solo models are renewables compatible and supplied pre-fitted with a coil, meaning that the primary energy source will always be from renewable gains and the complementary Rinnai water heater will only apply the precise amount of gas to boost the difference in temperature.

Rinnai’s Infinity brand carries the widest range of condensing gas-fired water heating units and systems- and all are A rated on ErP – on the market today with the most impressive efficiencies in operation, leading the field in technological innovation.

Key Features of the Solo range are: Stainless steel cylinder with high thermal efficiency and Ultra Low standing heat loss; Highly efficient continuous flow water heater is used as the heating booster; Rinnai Patented Lean-rich Low NOx burner (Solo20 & Solo32 only); Compatible with Renewable heating source through the renewable pipe in the cylinder (Solo20 & Solo32 only); Industry leading higher modulating ratio; Compact design for limited space; Inbuilt lime scale detector; Inbuilt immersion heater for the emergency backup; Easy read fault diagnostics via Status monitor; 10 years cylinder warranty (subject to terms & conditions).

For more information on the RINNAI product range visit www.rinnaiuk.com.
/0 Comments/by

Brio UK strengthen sales team

With increased growth in sales, Brio, the leading global brand name in sliding and folding gear for interior and exterior door hardware, has recently appointed two experienced sales personnel to manage and support the company’s sales activity. The two new appointments – Daryl Curtis and Nigel Walsh – bring with them a wealth of knowledge and product expertise.

Brio’s two new Business Development Managers, Nigel and Daryl, share more than 65 years of building industry experience, with particular emphasis on door, sliding door systems, fixings, sliding door gear and architectural hardware.

Both have spent time with leading industry manufacturers at management level with Daryl experiencing time overseas in Hong Kong and Malaysia.

The move to Brio for both of them was an easy decision as the company’s level of service and commitment to research and quality of product range would undoubtedly push forward the continued growth and success.

Brio’s General Manager, Dave Newton commented on the appointments: “Nigel and Daryl are a fantastic addition to the Brio team, with their practical experience and solid sales background, they will be an integral part of Brio UK’s future growth plans.”

For more information please visit http://briouk.com/
/0 Comments/by