Latest innovations and products in the building fabric section of the construction industry.

Liverpool Heart and Chest Hospital Improve Access with Axis

The ongoing refurbishment programme at the Liverpool Heart and Chest Hospital identified a set of emergency exit doors on the Holly Suite Cardiac Day Care Unit being regularly used as a delivery point for supplies and exit for waste materials. The doors were not automated which made it difficult to move trolleys through the doorway and left them prone to damage, both cosmetic and functional.

Discussions with Axis Automatic Entrance Systems of Northampton led to the replacement of the old doors with a set of half glazed aluminium doors automated with Axis ax85 Universal swing door operators. These allow push button operation to open the doors from the inside of the building with a delayed action setting allowing ample time for users to pass through the doorway before they automatically close to maintain security and fire protection. From the outside door operation is initiated by a magnetic card reader which restricts access to authorised users.

The name ax85 comes from the 85mm height dimension of the unit making it one of the neatest systems on the market. The universal qualities of the ax85 drive system derive from its electro-mechanical construction and its modular design. When the door drive motor operates, it simultaneously tensions a spring integrated in the drive housing. The closing movement uses energy stored in the spring, which, if necessary, is motor assisted.

Optimum power deployment is achieved in the entire door swing area, even without motor assistance. This moves the door reliably to its end position and also complies with the norms and standards of current safety requirements. The ax85 is approved as a hold-open system for fire protection barriers and can be used with various fire-protection profile systems.

Elsewhere on the site, a pair of swing doors on the ambulance entrance to the Critical Care Unit was causing problems. The old operators installed by another company some years ago were failing to cope with the strong winds that regularly blow directly onto the doors of that part of the building. This time Axis recommended a single leaf Stanley Dura-Glide sliding door system that opens automatically when the monitored safety and activation (combined) sensors detect an approaching ambulance crew or other user.

The new sliding door is not affected by the local wind and shuts securely every time. The sliding configuration also maintains clear access to a store area that was previously reduced by the operation of the old swing doors.

Axis Automatic Entrance Systems also supply, install and maintain a wide range of folding doors, bypass doors and bifolding doors. The range includes doors for specialist installations such as hospital intensive care units as well as shopfronts, curtain walling, security roller shutters, turnstiles, car park barriers and architectural ironmongery. Complete access control systems can also be supplied and installed.

Axis employs ADSA Authorised Technicians (Automatic Door Suppliers’ Association) for the specification, supply, installation and maintenance of automatic door operators as per the guidelines of EN16005 (formerly BS7036:1996 – Code of Practice for safety at powered doors for pedestrian use).

For further information call 0844 504 6525, email sales@axisautomatic.com or visit www.axisautomatic.com


Further reading

Gebrik System Awarded BBA Certificate

Aquarian Cladding Systems Ltd announced today that the wide range of applications of its Gebrik Insulating Brick Cladding System has been recognised by the British Board of Agrément (BBA) with the inclusion of an additional product sheet within its existing BBA certificate 07/4403.

The new product sheet covers the use of the innovative brick cladding system onto lightweight steel frame systems (SFS), timber frame and structural insulated panel (SIP) systems up to a height of 18 metres, and for use on SFS over 18 metres in accordance with the recent successful BR135: Annex B fire test, carried out at the Building Research Establishment (BRE). This is in addition to the certification for use onto clay and concrete masonry buildings, which has been held for over 10 years.

The system was subject to rigorous evaluation by the BBA across a range of factors, including thermal performance, strength and stability, behaviour in relation to fire, the risk of condensation and durability. The certificate confirms that when correctly installed, used and maintained, Gebrik satisfies or contributes to satisfying the relevant requirements of the Building Regulations (in England, Northern Ireland, Scotland and Wales), the CDM Regulations (2007) and the NHBC Standards (2014).

Upon receiving the certificate from BBA Chief Executive Claire Curtis-Thomas, Paul Richards, Aquarian Cladding’s Managing Director, said: “As the UK’s most recognised independent assessment and testing authority, the BBA is respected throughout the industry so we and our manufacturing partner Isosystems are absolutely delighted to have been awarded this addition to our certificate.

“Gebrik is the only off-site manufactured, insulating brick cladding system to be backed by a BBA Certificate, reinforcing its position as the best-tested system on the market. The BBA award follows earlier successful testing of Gebrik both for weather-tightness with the CWCT and fire performance with the BRE.”

Already proven in a wide range of education, residential, commercial and healthcare applications throughout the UK, the Gebrik insulating brick cladding system delivers significant operational, performance, construction and aesthetic benefits. For more details, visit www.aquariancladding.co.uk or call the company’s support team on 0844 334 0077.


Further reading

Cedar Tree Construction specifies Acme clay tiles to replicate Canadian style in the UK

An innovative Canadian style home, built as a showcase by Cedar Tree Construction, is using Marley Eternit’s Acme Grey Sandfaced clay plain tiles to replicate the style of the cedar shake roofs commonly seen in Vancouver.

Greg Jones, the owner of Cedar Tree Construction, recently relocated back to Swansea in South Wales after spending four years in Canada, building superior homes. Inspired by the beautiful timber home designs, he decided to design and build his own family home as a showcase to demonstrate how the Canadian style of construction could be incorporated into new build and renovation projects in the UK.

Marley Eternit’s Acme Grey Sandfaced clay plain tiles in a single camber were specified to replicate the aesthetics of Canadian wooden shake roofs, as well as to complement the cedar shingles that were being used on vertical elements of the build.

Greg Jones explains: “I’ve worked with Marley Eternit on roofing projects before and they were able to provide me with technical support to help me find the perfect roof tile, not only by providing a range of samples but also by identifying projects that I could visit to see how the tiles would look on a completed roof.

“The Acme Grey Sandfaced plain tile was the closest match on the market and replicates the aesthetics of cedar shake without the high cost. Once I had chosen the tile, Marley Eternit provided estimates and suggested local roofing contractors to carry out the project. The finished roof looks beautiful and showcases how the aesthetic simplicity of timber with a clay roof can create beautiful, distinctive homes in this country.”

Acme single camber clay plain tiles enable the creation of contemporary roof designs with the warmth and character of clay. Suitable for use down to roof pitches as low as 30 degrees, Acme clay plain tiles are available in a range of colours and textures. The tiles also have impressive environmental credentials with the ability to achieve an A+ rating in the BRE Green Guide to Specification, maximum credits towards the BES 6001 Responsible Sourcing framework and carbon footprint data at product level.

Sarah Jackson, marketing product manager at Marley Eternit, adds: “The Acme clay plain tiles give the natural beauty that Cedar Tree Construction was seeking to emulate with this project, highlighting how a stunning roof can be achieved at an affordable price. We are delighted that they have chosen to use our tiles on this innovative new build and we look forward to working together again in the future.”

Marley Eternit’s investment in clay tile manufacturing means that it has the largest clay plain tile production capacity in the UK. This includes the evolution of an unrivalled palette of colours, textures and cambers and a wide range of fittings and roofing accessories.

For further information on our range of products and services just ask ME at www.marleyeternit.co.uk or call ME on 01283 722588. You can also follow ME on Twitter @MarleyEternit. If it matters to you it matters to us, that’s why with ME it’s all about you.


Further reading

Hunter shows its can do attitude in Charlton

A “can do” approach and a close working relationship with the contactor has helped Hunter Plastics to come up with a solution that made part of the regeneration of the Glades development in London much more straightforward and cost-effective. The Technical and Fabrications teams at Hunter put their heads together to design and manufacture a bespoke fitting for walkway drainage.

The redevelopment of the Glades was, at the time, the largest scheme of its kind in Europe. Main contractor Mears carried out a programme of external repairs and renovation to over 50 buildings, in an incredibly tight nine month timescale, for client Family Mosaic Housing. The programme included external and internal repairs and renovation, in a £14million project, which was the largest CESP-funded scheme in the UK. Part of the scheme meant that rainwater and soil vent pipes had to be moved – which is where Hunter came in.

Steve Everitt, who managed the project for sub-contractor N&J Building Services was the man to bring Hunter in on the project, after noticing that the design of the drainage outlets for walkways and balconies was rather complicated and, as a result, also expensive. He had an idea of how to make the whole process a lot simpler and called in the experts at Hunter to help make it into a reality.

“When I looked at the original plans for this part of the project I thought the drawings looked a bit complicated and expensive,” says Steve. “I had an idea of how to make the process smoother for the client and easier for my team to install – it was a no-brainer.” Steve worked closely with the whole Hunter team – the rep on site, the Technical team back at the office and finally the Fabrication department at Hunter’s factory based in Kent. And he can’t speak highly enough of the service he received. “It really was excellent – they delivered on every promise and it was great to know that the techy guys at Hunter were always on the end of the phone when I had a query,” he concludes.

Hunter realises that not all product requirements can be met with standard components. So they have a fabrications department that is fully equipped to provide fabrications to overcome these difficult installations. From gutter fittings at any degree angle through one or two planes, bends to unusual degrees, or branches with odd configurations, the Hunter team can usually come up with a viable solution. Job’s a Good ‘un.

Hunter Plastics, part of the Aliaxis Group manufactures a wide range of PVC-U rainwater, soil and waste and underground drainage systems in the UK.

For further information, please visit hunterplastics.co.uk


Further reading

DuPont™ Tyvek® FireCurb™ advanced breather membranes fitted in the world’s first two-storey, open source WikiHouse

Forward-thinking construction techniques require pioneering solutions. That’s why DuPont™ Tyvek® FireCurb™ Housewrap – an innovative breather membrane designed with both safety and sustainability in mind – was chosen for an exciting collaborative project. Built to coincide with the London Design Festival 2014, WikiHouse4.0 became the world’s first open source two-storey house, the basics of which can be accessed and assembled within days – for under £50,000.

The installation, led by Arup, The Building Centre and 00 design, was intended to raise awareness about housing issues and the potential application and intervention of ingenious new solutions. Designs will be free to download and can be adapted before being ‘digitally’ manufactured.

Alastair Parvin, WikiHouse 4.0 co-designer at 00 design studio says, “We are trying to spark people’s imagination as to how technology can now enable almost anyone to afford their own custom-built house without the need for conventional construction. We don’t believe that WikiHouse is the only solution to the current housing crisis, but we do want to host a disruptive debate and to challenge landowners, urban planners and policy makers to think differently about the barriers – such as land or building costs.”

The WikiHouse 4.0 frame is a modular construction system made from SmartPly OSB boards that have been CNC machined into numbered parts. It is assembled with wedge and peg connections rather than bolts and with the final panels held into place using ordinary screws. The 70 square metre structure beautifully demonstrates how a simple, easily assembled wooden frame becomes air-tight, waterproof and secure.

DuPont Building Innovations was keen to support the project with an appropriate membrane solution, fitted behind the fibre cement board façade to seal the timber ‘chassis’ and protect the structure from fire, climate and interstitial condensation. The main part of the build was undertaken in six days – and the DuPont™ Tyvek® FireCurb™ membrane was easily and correctly installed in under 3 hours, with prior technical advice from DuPont and clear instruction guidelines.

DuPont™ Tyvek® FireCurb™ is a key development that adds superior flame retardant performance to the highly valued properties of the renowned breather membrane – such as reliable long-term weather protection, effective vapour diffusion and greater energy efficiency. Using innovative technology to reduce the flammability of polymer based substrates, DuPont™ Tyvek® FireCurb™ potentially limits or stops the spread of fire through the external envelope.

DuPont™ Tyvek® FireCurb™

Rather than use halogens, the technology employs a phosphorous containing agent that forms a ‘char’ layer at the surface when it is in contact with an ignition source. This thin layer of carbonized polymer is highly flame retardant and forms a barrier, slowing the release of flammable materials. Starved of fuel, the flame spreads over the membrane more slowly or not at all – and if the membrane does ultimately catch fire, it produces less smoke – another vital advantage for human safety. Rigorously tested, DuPont™ Tyvek® FireCurb™ Housewrap has a fire rating of class B-s1,d0 according to EN13501-1.

Energy-efficiency was also crucial to the WikiHouse 4.0 concept, thus a weather-tight seal that would enhance both thermal performance and interior comfort was the optimal system – qualities embodied in DuPont™ Tyvek® membranes and tapes, which are offered in range of formats to suit every type of build. Durability is also a key consideration for the project, for even though it can be assembled very quickly, a WikiHouse is intended to last.

Nina Tabink, Arup, Senior Structural Engineer commented, “A digital world is emerging where people can connect with anyone around the globe through a simple click. Arup believes in the potential of digital fabrication and open source technology and how this will provide an alternative collaborative way of working, bringing increased efficiencies. WikiHouse has proven to be a perfect partner to explore these new technologies.”

DuPont™ Tyvek® FireCurb™

Jenny Watt, PR & Marketing Manager, The Building Centre said “WikiHouse 4.0 opens up the potential of digital technology to change how we might design, make and construct buildings. The added value of building technology such as DuPont™ Tyvek® FireCurb™ breather membranes was most welcome to the project.”

The Building Centre, 26 Store Street, WC1E 7BT, London www.buildingcentre.co.uk/aboutus/contact.asp

To learn more about DuPont™ Tyvek® FireCurb™ technology, please visit www.FlameRetardant.tyvek.com

For more commercial and technical information about DuPont™ Tyvek® in the UK please visit: www. tyvek.co.uk
or call 01275 337 660 (087 922 2740 in ROI)


Further reading

Striking new single ply school roof makes its mark

Oughterard National School is a new single-storey primary school situated in the Connemara district of west Ireland. The architectural vision for this new building, which boasts 16 state-of-the art classrooms, was to create a modern and aesthetically pleasing learning environment that would add real value to the local community. Another priority to the design team was using sustainable technologies and construction techniques to help reduce the building’s environmental impact.

The school building consists of eight roof areas on a variety of different pitches totalling over 3,400㎡ in all. Aesthetics were important to the client as most of the roof areas are pitched at a 20° slope making them highly visible, particularly from the central courtyard area. Bauder’s Thermofol single ply membrane was specified for the new roof because it is lightweight, long lasting, and visually appealing – with welded roof profiles incorporated to give the appearance of a standing seam metal roof. The system build-up also included Bauder’s 120mm Thermotech Glass Insulation for superior thermal performance, ensuring the roof achieved the required 0.19 U-Value.

Due to the visibility of the roof, all aspects of the job were under high scrutiny. The roof profiles had to be lined up perfectly along all the hips and valleys of the roof, requiring a high degree of skill and workmanship from approved contractor Noel Deane Roofing & Cladding, which they well and truly delivered on much to the delight of project specifier Martin Keaveney of JJ Rhatigan who stated, “Bauder were able to provide all the roofing materials needed, which enabled them to deliver a comprehensive solution and guarantee. They satisfied all delivery commitments and the new single ply roof looks and performs just as we expected.”

Since opening in September 2013 this contemporary school building has been recognised for its innovative design and architectural excellence by many award-giving bodies, including being shortlisted for the Best Educational Building at the RIAI 2014 Irish Architecture Awards. The school has also been commended for its environmental efforts, an example of this being how they collect and store rainwater in a reclamation tank so that it can be reused throughout the building.

For further information, please visit bauder.co.uk


Further reading

Sika Liquid Plastics suits iconic Liverpool Cotton Exchange building

A Sika Liquid Plastics waterproofing system has proved to be the perfect fit for one of Liverpool’s most historic office buildings, The Cotton Exchange.

Registered Sika Liquid Plastics contractor and national concrete repairer, Grade 2 Specialist Structural Repairs, based in the North West, were specified for the job after the company applied to go on a Liquid Plastics contractor scheme. Part of the process Grade 2 had undertaken was to put three projects forward, The Cotton Exchange being one of them.

Grade 2 were briefed to carry out isolated concrete repairs to wall areas along with restorations to all the decoration works to the exterior of the property. The Cotton Exchange also required a Sika Liquid Plastics product that was watertight, ensured longevity and was aesthetically pleasing to the human eye; this led to the specification of the Sika 618 and Sika Reemat premium being installed.

“The building is designated by English Heritage as a Grade II listed building; it has a very unusual looking roof, it looks a bit like an air-raid shelter,” Grade 2’s operations manager Steve Parry comments.

“The shape of the roof caused a few problems for us, especially when the application of the first coat had been completed as we kept slipping off it when applying the final coat, due to the unusual contour of the roof. However, working with a liquid applied membrane certainly made the job a lot easier.”

“It was finished on time, on budget and the client is very pleased with the outcome of the repairs so it has been a very successful project for all involved.”

For further information, please visit gbr.liquidplastics.sika.com/


Further reading

Celotex provides an exceptional degree of insulation at York University

Sustainability is a key feature of the £30 million Goodricke College which forms part of the £750 million development of the Heslington East campus at the University of York. With this significant investment set to prepare the university for the future, and materials chosen to meet the development’s high performance criteria as efficiently and effectively as possible, PIR insulation from Celotex was specified to create a thermally efficient building envelope.

Designed by architects BDP and built by Shepherd Construction, the 16,000㎡ college has incorporated a range of energy saving measures such as high performance insulation to achieve a BREEAM ‘excellent’ rating. To aid with this, Celotex provided its innovative EL3000 insulation board, specially designed for use in flat roofing applications.

For six campus buildings, specialist contactor Roofdec Ltd of Rotherham installed 7,500㎡ of 100mm thick Celotex EL3000 boards onto a vapour barrier which was adhered to the roof’s metal structural decks. The built up flat roofing system was then finished with Sarnafil G410-ELF single ply membrane, attached directly to the surface of the insulation boards to create a thermally efficient bonded roofing system.

Celotex EL3000 has an excellent lambda value and with a glass tissue facer which is perforated on one side, it removes the requirement for a two layer solution and is suitable for either bituminous or single-ply roofing. It provides a quick and easy method of achieving effective thermal insulation in flat roofing structures and does not allow a build-up of moisture below the waterproofing membrane.

Alongside its U-value, which lowers heating requirements and thereby CO2 emissions, Celotex EL3000 has low Global Warming Potential and zero Ozone Depletion Potential. Available in a range of thicknesses from 50mm – 150mm and in two different length of boards – 600mm and 2,400mm – it is versatile and easy to cut to shape on site, providing Roofdec with an easy method of constructing the roof.

Celotex insulation is incredibly durable, dimensionally stable and unaffected by temperature cycles. It also does not corrode or degrade on contact with welding chemicals used in conjunction with many flat roofing systems.

With Phase 1 and 2 of the development now complete, this project demonstrates the versatility of Celotex’ products – and with flat roof applications well established in the UK building industry, the company’s portfolio of solutions offers specifiers and installers thermally efficient, simple and cost effective methods of insulating such rooftops.

For further information please visit www.celotex.co.uk


Further reading

Internorm says Yes to the Build Show

Preparations for the most extensive contractor-based exhibition in a decade have received a massive boost, as fenestration giant Internorm signs up to attend next year’s inaugural Build Show.

As Europe’s largest window brand, Internorm’s commitment to the Build Show highlights the significance of this brand new exhibition. The family-owned company has more than 80 years of experience in the industry and its name is synonymous with quality and reliability.

Experts in high performance, thermally insulated window systems and pioneers in the UPVC sector, Internorm plans to exhibit a range of new additions to its innovative door and window solutions.

Andreas Simmer, Managing Director of Internorm UK, commented: “Windows and doors are a crucial component of any building. As well as their obvious functionality, they also add important aesthetic appeal. Bearing this in mind, ensuring the correct specification is paramount not only for the short term, but for years to come.”

He continued, “The Build Show is a great opportunity for us to share our knowledge with architects, specifiers and end clients, as well as giving us the perfect chance to showcase our extensive range of products.”

Paul Godwin, Managing Director of the Build Show, said: “Our aim for the Build Show is for it to benefit the entire industry, from contractor, to specifier, to supplier. Having Internorm on board is great news as it will give visitors the chance to interact with an industry leader on a face to face basis, creating new and unique opportunities for business and growth.”

Taking place at the Birmingham NEC next year, the Build Show will bring together contractors, specifiers, builders, suppliers, housebuilders, architectural technologists and clients, providing the perfect forum to network, showcase new products and discover opportunities for professional development.

Supported by a comprehensive seminar schedule that is influenced by the Build Show’s partners: the Federation of Master Builders, the Construction Industry Training Board, Glenigan and the Construction Products Association, the Build Show will address the real issues faced by the construction industry today.

Some of the exhibitors already signed up include, VEKA, Festool, VW, Marmox and many more.

For more information about exhibiting or attending, please visit www.buildshow.co.uk


Further reading

John Tate joins the experienced team at Fernox

Fernox, the UK’s leading chemical water treatment manufacturer, has appointed John Tate as Technical Project Engineer. An experienced mechanical engineer and designer, John will now have a central role in the company’s comprehensive product development programme.

With a degree in Mechanical Engineering from Southbank University, John began his career in 1984 at Howard Pump Company before working with electronic drives at Control Techniques and more recently with industrial filters at Amazon Filters. John has a wealth of relevant expertise and knowledge that will prove invaluable within his new role at Fernox.

“I am delighted to join Fernox and such an experienced and established technical team,” commented John. “I look forward to being able to contribute to future product modifications as well as helping to drive forward new product development.”

Fernox is currently celebrating its 50th anniversary year. Since the company was founded in 1964, Fernox has consistently launched game-changing product innovations to market. For more information visit www.fernox.com.


Further reading