All models in the Rinnai range of Energysaver fanned convection powered flue gas fired space heaters are designed specifically for use in schools, community centres, libraries, conservatories and churches. They give exceptionally high efficiencies in operation and subsequently reduced running costs.

A major problem when heating a church or other large public space is the pattern of usage, fabric, design and the age of the building. For example, the building may be heated for a Sunday service, or possibly a mid week meeting and then unused for days at time. It is for just such situations as these that the Rinnai Energysaver range has been devised.

Rinnai energy saver units are very easy to install as they do not need expensive (and extensive) ductwork, nor do they involve the necessity to run domestic heating circuits for radiators or pipework to boilers. This can cut down drastically on cost and time at the point of installation.

Rinnai Energysaver Space Heaters deliver energy-efficient and consistent warm air powered by Natural Gas or LPG options and are built with fully modulating burners so heat output and energy input is reduced as the space warms up. The units may also be controlled via a central timer for added economy and occupant comfort.

The units, encased in a low surface temperature (LST) casing to avoid any risk of unnecessary discomfort, are swift to warm up, easy to control and are very economical to run. They offer easy on/off operation and intelligent features such as self-diagnostics and a self-learning pre-heat time to maximise heat up time and energy consumption.

The Rinnai Energysaver 559T unit turns in efficiencies of almost 92% when you consider the effective heat generator seasonal efficiency required for UK building regulations. It has an input of 6.4kW and output of 5.2kW. The unit measures 554mm x 750mm x 250mm.

The Energysaver 1004T has an input of 11.6kW and outputs 10.23kW. Its measurements are 670mm x 930mm x 315mm and it has energy efficiencies of 96% under the guidance of Part L 2014.

Both heaters are also suitable for central timer control. This feature allows the building manager to run any number of Rinnai space heaters off a central time clock providing heat to the large of spaces. The Energysaver Multi controller is not limited to single Energysavers as the flexibility of the system guarantees units can be mixed and matched to satisfy even the most unique of buildings.

The Rinnai Energysaver range comprises fanned convection-powered flue models that exceed seasonal thermal heating guidance under Building Regs Part L, while also heating the usable space within buildings, ensuring comfort, efficiency and compliance.

In a building with high vaulted ceilings, with conventional convector heaters and wet systems, the heat will immediately rise to the ceiling. However, Rinnai has come up with an innovative solution, that heats
from the floor up and by modulating gas usage in relation to room temperature, provides unparalleled levels of comfort combined with efficiency.

In effect, the heaters provide safe, controllable heat with maximum energy efficiency, combined with flexibility of location.

“Rinnai energy saver space heaters really do deliver a cost saving on installation, low operational costs and maintenance, lower life cycle costs, lower replacement costs, high energy efficiencies. They are infinitely suitable for refurbishment project and they come with a 15-year warranty on the heat exchanger,” explains Chris Goggin, Associate Director of Rinnai UK.

For more information on the RINNAI product range visit www.rinnaiuk.com