Posts

Fall protection takes off at Virgin Atlantic with Safesite

Safesite, a supplier of fall protection solutions, has provided Virgin Atlantic with a collective roof edge protection system that ensures optimum roof top safety for maintenance and inspection teams and complies with all relevant health and safety regulations.

Located in Crawley, ‘The Base’ is one of two Virgin Atlantic buildings that house its global Headquarters. Situated in close proximity to Gatwick Airport and Crawley’s city centre, the building provides training and technical facility for cabin crews, pilots and engineers. Built in the 70s, the building includes an extensive flat PVC roof which is split over several levels.

The building previously featured partially installed guardrails and failed demarcation systems which were deemed not fit-for-purpose. It therefore became necessary for the building to have a roof top safety upgrade comprising a complete roof protection system that enables safe access to the entire roof.

Work began in December 2015 to provide a continuous, co-ordinated roof safety system to the roof perimeter of the building and surrounding the roof lights enabling safer roof access. Norland-based commercial property adviser, CBRE Group managed this project and contracted Safesite to specify and install a full guardrail scheme. After removing all existing guardrails, demarcation bases and chain, Safesite installed 900 Lm raked and standard KeeGuard® systems.

“Once we became aware that the previous systems wasn’t performing correctly, we wanted to ensure that the new system was compliant with regulations, provided a full safety solution and wasn’t obtrusive to the design of the building” says Stephen Earl, Project Manager, CBRE (Norland). “Safesite is the expert in this area, and as they can offer the full service, from site surveys to installation, it was clear that they were the right choice for this project. The system that they have installed ticks all the boxes for us, and provides the client with the assurance that anyone accessing the roof will be safe.”

The KeeGuard® range includes standard vertical, raked, radiused and folding systems. The modular design features Kee Klamp® open-style fittings, which facilitate quick and easy installation of the horizontal rails and 100% recycled PVC counterweights. No welding, threading or bolting is required on site, which further speeds up and simplifies the installation process.

Suitable for installation on any flat roof up to a 10° slope, and compatible with concrete, asphalt, PVC membrane and felt roof surfaces, KeeGuard® can be used where a restraining wall is in place or where the rooftop is completely open around the perimeter. The flexible guardrail system can be used for retrofitting to older buildings as well as for new constructions.

The range is fully tested and either meets or exceeds current rooftop safety requirements, including EN13374 Class A, EN ISO 14122 Part 3 and BS 6399: Part 2 1995 Wind Codes.

For further information, please visit www.safesite.co.uk/
/0 Comments/by

Kee Safety provides safe access with self-closing safety gates

Kee Safety, a global supplier of fall protection equipment and safety railing systems, has launched Kee Gate, a range of self-closing safety gates, which provides industrial workers with a safety solution when working at height and on ground level.

Designed to work both internally and externally, on ladder and stair access points, roof hatches, walkways and roof tops, Kee Gate, ensures maintenance, inspection and warehouse staff can fulfil their job, follow best practices and comply with current safety standards, without putting their safety at risk. Kee Gates are spring loaded so can automatically close behind the user, providing an added level of security and overcoming the potential for human error. This type of system is the preferred solution to chains, bars or sliding tubes, as these traditional forms of protection can lead to a hazardous void, when used incorrectly.

Kee Safety self-closing safety gates are available in galvanised steel and if required can be powder coated in safety yellow. The safety gate is available with standard ‘U’ bolts for fixing to uprights of 33.7, 42.4 and 48.3 mm diameter, enabling the gate to be fixed quickly to existing supporting structures, posts or stringers. An additional fixing pack is provided which allows the gate to be fixed to square, flat or angle uprights. Easy to install on all types of handrails or to retro-fit existing structures, such as galvanised handrails and roof edge protection systems, Kee Gate is 1 metre wide. Designed to be trimmed on-site, this solution saves companies the time and money it takes to fabricate their own gates.

Kee Gate is compliant with the requirements of EN 13374 Class A, EN ISO 14122 Part 3 & Part 4 and is CE marked to EN 1090. The range is also compliant with international standards, meeting OSHA, O.B.C and I.B.C requirements. The system has undergone extensive testing to ensure total reliability of the gates. These include salt spray testing to ASTM B117-11 Neutral solutions over 200 hours to assess the coating’s corrosion resistance, life cycle testing to BS 6375-2:2009 Clause 6.5 – Opening and closing of Gate through 90 degrees 50,000 cycles and Abuse Testing where 9 x 25kg weights were suspended from the gate to test what happens if pressure is applied. This ensures durability, superior corrosion resistance and defence against signs of wear.

For more information, please visit www.keesafety.co.uk.
/0 Comments/by