Redring Selectronic Premier, the UK’s number one care shower, has achieved the highest A class energy efficiency rating, in line with the new Energy-related Products Directive.

Trusted by care professionals for over 25 years, the Selectronic Premier range of thermostatic showers features advanced temperature control technology, intuitive user controls and rapid one-button commissioning for an intelligent and safe showering solution that is easy to use and install.

Selectronic Premier uses highly accurate thermostatic technology to maintain constant water temperatures within just +/-0.5°C, while adjustable temperature locking allows maximum water temperatures to be set.

Large one-touch start/stop and temperature control buttons together with a large LED display and audio feedback allow easy shower operation. Plus, smart data logger technology tracks showering patterns to save energy and monitor usage, and a unique fault-finder system allows problems to be diagnosed and solved, with no need for an engineer.

For further information, visit www.redring.co.uk.

Mumford & Wood Conservation™ sliding sash windows are now SBD certificated to meet Approved Document Q – Security. Recognised as Britain’s leading manufacturer of high performance, tried and tested timber windows and doors, Conservation™ sash windows now carry additional security features that meet the requirements of Document Q Building Regulations, for the new build housing sector, which comes into effect 1 October 2015.
“To the untrained eye the Conservation Secure™ sash window looks no different to its predecessor, so much so that even burglars won’t see this until they have struggled with the security features and, of course, timber offers better strength to weight ratios than any other frame material,” says Frank Buckley, managing director, Mumford & Wood. “High levels of thermal, acoustic and air tightness come as standard and our products surpass the requirements of Part L Building Regulations.”
The technicians at Mumford & Wood have innovated improvements to the existing and coordinated products in the Conservation™ range enabling a new higher level of security without any visible difference. These windows and doors join a certificated line up in the Conservation Secure™ collection which includes SBD certificated casement windows, French doorsets, bi-folding and entrance doors.
The security standard demanded by Building Regulations, to which products are tested, is known as PAS24 but prior to this all products must be tested and rated for weather and air tightness to meet BS6375 (Parts 1 & 2). “It is pointless having safe and secure windows and doors if you cannot keep the weather at bay,” continues Buckley.
“While the requirement to meet Part Q will apply for new buildings only, existing home owners will want these security benefits applied to replacement products for the upkeep and maintenance of their properties as well as for major refurbishments and extensions.”
Independent research carried out on behalf of the British Woodworking Federation’s Wood Window Alliance (WWA) scheme, of which Mumford & Wood is a leading member, has proven that timber windows and doors made in accordance with their standards will last for 60 years or more and that, over time, will be carbon negative. Conservation™ products are manufactured from engineered Siberian Larch wood components that provide ultimate levels of strength and stability. With the benefits of double glazing, and optional glass specification, these products offer ultimate levels of thermal and acoustic performance with peace-of-mind security.
Further information about products in the Conservation Secure collection is available on 01621 818155, or please visit the website www.mumfordwood.com.
Follow us on Twitter @mumfordwood or facebook.com/mumfordwood for the latest company news and updates. Visitors are welcome at the company’s showroom in Tiptree, Essex and at The Building Centre, Store, Street, London.

Arcon Housing Association has specified Riven Edgemere tiles from Marley Eternit for its new housing development in Manchester. The slate effect concrete interlocking tiles are currently in high demand from housing associations looking for a natural slate aesthetic on a budget.

The tiles have been used on Arcon’s new development of ten properties on the site of the former St George’s Church in Gorton, in the south east of Manchester. The new two and three-bedroom homes, located on Abbey Hey Lane, Abbey Close and Union Street, are part of the Housing Association’s rapidly expanding new build programme

Arcon Housing Association had previously used slate effect clay interlocking tiles but decided to switch to Riven Edgemere in Smooth Grey for this development because they were more cost effective.

David Hutchinson, senior building surveyor at Arcon Housing Association, comments “We wanted to achieve a slate aesthetic to give a contemporary feel to the new homes but there was certainly no room in the budget for natural slate. The riven surface and thin leading edge of the Edgemere tiles offered us a cost effective close appearance to slate. They look very impressive on the finished houses and blend well with surrounding properties.”

Charlotte Hughes, product manager from Marley Eternit, adds “We have seen a significant increase in the number of housing associations using our Edgemere tiles because they want to achieve a slate look but are faced with growing budgetary pressures. We have also seen some movement away from slate effect clay interlocking tiles towards products like Edgemere, which still offer a high aesthetic but are often more cost effective. The Riven version is particularly popular because it has a textured slate like surface but is the same price as the rest of the Edgemere range and is a good option when planners require a closer match to the look of natural slate.”

Arcon Housing Association’s new build properties must meet high sustainability and Lifetime Homes standards. Charlotte Hughes adds “The environmental credentials of Edgemere interlocking tiles are another reason why they are in such high demand for social housing projects, with independent carbon certification, the ability to achieve an A+ rating in the BRE’s Green Guide to Specification and certification to the BES 6001 standard for Responsible Sourcing.”

Marley Eternit’s Edgemere’s large format concrete interlocking tiles come with a thin leading edge for a slate like appearance at a more attractive price. With only 9.7 tiles per square metre, Edgemere is a single lap solution that is quicker and easier to install than natural slate and 40% thinner than standard concrete interlocking tiles. With the ability to perform at pitches as low as 17.5°, Edgemere has the versatility to be used on a wide range of roof types and is now available in three variants, standard, riven and duo.

For more information or literature, please visit www.marleyeternit.co.uk/edgemere.

For further information on our range of products and services just ask ME at www.marleyeternit.co.uk or call ME on 01283 722588. You can also follow ME on Twitter @MarleyEternit. If it matters to you it matters to us, that’s why with ME it’s all about you.

With just weeks to go before the industry heads to Birmingham for UK Construction Week, planning a visit around the comprehensive seminar schedule is vital. Delivering high-level insights into the key issues facing the construction industry from a raft of recognisable names, the Main Stage seminar programme is integral to the event.

Each seminar will consist of an hour-long panel discussion, covering a key topic. Visitors will not fail to recognise the TV personalities – themselves international broadcasters, journalists and authors – heading up the seminar programme.

John Humphrys will facilitate day one of proceedings on the main stage. The programme will commence with a welcome and keynote presentation from the government’s chief construction advisor, Dr Peter Hansford. He will set out the priorities and plans for construction industrial policy over the next electoral cycle. The day will proceed with discussions on product and process innovation, tackling how the industry can break away from traditional construction and engineering processes.

A series of speakers, including RICS’ Jeremy Blackburn, CPA’s Dr Noble Francis and CIAT’s Gary Mees will next discuss the economic environment and its impacts on the industry, considering how we can protect construction from potential economic weaknesses. The image of the industry as a whole will also be under the spotlight, with contributions from Brian Berry of the FMB, Christina Jackson from Amey and Tim Carey from Willmott Dixon. Among others they will consider how the industry has an image problem – governments do not value the construction industry as a key driver within the UK economy and it is not perceived by the public as a modern employer.

Rounding off day one, Dennis Seal of DLS Strategic Ltd and John Stewart of the HBF will explore whether capitalism can fix the housing crisis. Their discussion will look at market-orientated solutions, which might bridge the affordability gap plaguing the country’s housing market.

Presiding over the second day of seminars, Steph McGovern will chair a series of talks that look at skills in the industry. Marie-Claude Hemming from CECA, together with Kim Wortz of RICS, John Patch from Roger Bullivant and the CITB’s Sarah Fenton will begin the day considering how to find and retain talent in the industry.

The skills shortage is the issue for Rupert Scott from TRADA, with Rob Pannell from the Zero Carbon Hub and Pauline Traetto from the BRE Academy. They are joined by Alex Birks from the CITB, Tom Storey of K10 and Bridget Bartlett of the CIoB.

The Birmingham Development Forum is next and outlining a vision of how the Birmingham of the future could and should look, the panel will touch on regeneration and getting the balance of mixed use right. Contributors include Make Architects’ Ken Shuttleworth, Dan Smyth from BDP and Liz Peace from Curzon Regeneration Company, together with Sir Albert Bore from Birmingham City Council. Infrastructure is the order of the day too, with insights into current and upcoming ambitious infrastructure projects in the UK, such as the Silvertown road tunnel, Crossrail 2 and the Bakerloo line extension.

Concluding proceedings on the middle day is a debate on the productivity of the sector. Just why can’t the UK build a skyscraper in 14 days? Attempting to address what is holding the industry back is a panel of six speakers, including Crossrail’s John Pelton and Kamran Moazami from WSP/ Parsons Brinckerhoff.

Seminars on the final day of the trade event, facilitated by Krishnan Guru-Murthy, will open with a presentation from Dr David Hancock on how to drive more collaboration between government and the construction industry, what progress is being made towards the government’s Construction Strategy and the Construction 2025 vision as well as how to improve project capability.

Paul Bogle of the National Federation of Builders will join Liz Welton from Coventry City Council next, to look at procurement improvements and opportunities in construction. Working smarter is the topic on the table for a panel of five including Simon Murray from ICE and Kevin Blunden from CABE.

This impressive schedule concludes with a panel discussion – joined by David Philp, Head of BIM Implementation, UK BIM Task Group, Department for Business, Innovation & Skills and AECOM – on the outlook for BIM in UK construction and building, with an update on BIM adoption and the next steps, how to enable SMEs to make the most of BIM and how it is currently working for contractors and house builders.

Richard Morey, Group Events Director at Media 10, responsible for UK Construction Week, said: “An overview of the seminar schedule and events on the main stage Seminar Theatre is vital for anyone planning to visit the show. We set out to create an informative programme of content that will complement and enrich the exhibition as a whole. The seminar programme is a key attraction for both visitors and exhibitors. I think the impressive roll call of speakers and the line up of topics will not fail to satisfy anyone attending over the three day event.”

Bringing together nine shows under one roof, UK Construction Week will be the biggest construction trade event the UK has seen in years. Taking place at the Birmingham NEC from 6 – 11 October (with the trade only days from 6 – 8 October) the event will unite 1,000 exhibitors with an expected audience of 55,000 visitors.

Visitors will be able to attend the Build Show, Timber Expo, the Surface and Materials Show, Energy 2015, Kitchens & Bathrooms Live, Plant & Machinery Live, HVAC 2015, Smart Buildings 2015 and Grand Designs Live.

For more information please visit www.ukconstructionweek.com or follow @UK_CW on Twitter.

REHAU will be staging its first ever Windows, Doors and Curtain Walling Surgery on Thursday 15th October at the newly opened REHAU Hub in The Building Centre, London.

Construction professionals who want to discuss the fenestration requirements on any of their planned projects can book an individual 45 minute slot with REHAU’s commercial manager Kevin O’Neill and get free tailored solutions and expert advice.

Kevin says: “In many of my meetings with architects and specifiers, they tell me how challenging it is to keep up to date with the ever changing standards and regulations governing this sector and to stay in touch with the latest developments in things like coloured PVC-U and Passivhaus solutions.

“This new initiative means that they can book a dedicated slot with me at The REHAU Hub and I will address all of the regulatory or technical issues which apply on any projects they’re working on and give them technical and design advice.

“I expect to be covering everything from wind loading and U-Values to fire ratings, acoustics and Passivhaus specifications. The aim is to share best practice and give practical, personalised help for individual builds and developments.”

The new REHAU Hub is a dedicated exhibition and presentation space housed on the ground floor of The Building Centre in Store Street, London, WC1E 7BT.

Surgery slots are available from 9am to 6pm on 15th October. For further information view our Video on YouTube or if you would like to book a place, click here.

Polypipe Ventilation, manufacturer of market leading energy saving domestic ventilation systems, is pleased to announce the launch of an innovative new Silavent air management controller, AMIE and a new range of Domus duct sound attenuators – designed to provide residents with greater control and comfort over their indoor environment.

The stylish Silavent AMIE (Air Management for Indoor Environments) controller provides enhanced control of Polypipe’s award winning Silavent Green Line HRX and HRX2 Mechanical Ventilation with Heat Recovery (MVHR) systems. A compact, wall mounted unit, AMIE enables the resident to directly manage the humidity and ambient air temperature of their dwelling through two main MVHR functions: extract fan boost speed operation, to help remove humid, unhealthy air and heat exchanger (summer) bypass to stop the unit from supplying pre-warmed air into the home; making AMIE ideal for summer and night time cooling.

There are often times within a domestic property when increased ventilation (boost rate) is required to remove excess humidity and temperature. Silavent AMIE provides the resident with the ability to boost the air flow through the MVHR system either automatically by humidity level sensing or manually using an external switch or push button. In the case of the latter, the MVHR unit will return to background speed after 15 minutes.

The MVHR unit’s summer bypass facility, which helps prevent homes from overheating during the warmer months – a popular option on the HRX MVHR models, can be more effectively controlled automatically using Silavent AMIE by room temperature sensing or programmed time settings. As households perceive what is a comfortable indoor air environment differently, AMIE very flexibly offers nine, easy to use pre set programmes to select from and a further four user defined bespoke programmes available with clear on screen instructions to follow.

In addition, Silavent AMIE has the option to proactively provide an MVHR filter cleaning reminder every 3,000 hours (approximately four months) and replacement reminder every 9,000 hours, helping to ensure healthy and clean indoor air quality is maintained

The second most recent key product launch for Polypipe Ventilation is the Domus duct sound attenuators, often referred to as Silencers, which offer improved sound attenuation and thermal insulation.

Domus rigid duct sound attenuators provide a simple, cost-effective solution to reduce nuisance noise from whole house mechanical ventilation systems which connect to a centralised appliance ducted to a number of different room outlets (such as an MVHR system). They effectively absorb sound over a range of audible frequencies, including traffic noise, noise from the ventilation fan and room to room cross talk. Building on the success of the previous sound attenuators, the new range provides greater sound attenuation than ever before, reducing noise levels by as much as 50dB; most importantly at the audible levels that are most commonly heard about the home.

Incorporating rigid duct sound attenuators into a whole house system is not only beneficial for home occupants but also helps installers and developers meet Building Regulation recommendations, which advise the system should not produce excessive noise as this may lead to the user adjusting the system detrimentally.

Third party verified by the Sound Research Laboratories (SRL), the new Domus rigid duct sound attenuators, which are designed for use with Polypipe’s most popular rectangular 204x60mm and 220x90mm duct systems are also now available for use with Domus Thermal duct insulation. Domus Thermal is a patented insulation system which will not only improve the thermal performance of the system, but also complies with Building Regulation requirements.

Keeping the homeowner’s indoor environment in mind, Polypipe have also manufactured the new Domus duct sound attenuators with Microban® protected foam to protect against microbial growth for a clean and fresh ventilation system.

Polypipe Ventilation has a well deserved reputation for quality, supported by excellent technical support, from a market leading manufacturer and designer. Polypipe Ventilation are well placed to offer immediate, practical solutions to Building Regulations Parts F & L. The company continues to provide differentiated solutions in the private and social housing sectors, transforming the way developers, specifiers, installers, home owners and distributors meet emerging environmental standards.

For more information, please go to www.polypipe.com/ventilation or contact Polypipe Ventilation on 08443 715523.

NVELOPE cladding support systems have been installed on Sterte Court, a development of high rise and low rise flats in Poole, which has received a facelift that has not only improved the visual appearance and sustainable factors, but also extended the buildings’ life for at least 30 years.

Sterte Court is a residential building in Poole, which dates back to the 1960s. When originally built, the two 10 storey and two 4 storey tower blocks consisted of 134 one and two-bedroom flats. Constructed with rendered concrete wall panels on a concrete frame, the buildings were poorly insulated. A project to upgrade the development began in 2013, when Poole Housing Partnership, an Arms Length Management Organisation, which was set up under the Government scheme to bring investment for improvements to homes across the Borough of Poole, got involved.

Poole Housing Partnership appointed Keepmoat as the main contractor for this £6.7 million project. With the aim being to improve the residents’ living conditions, reduce fuel poverty, and update the visual appearance of the four blocks, the project would take around 18 months to complete. When it came to focussing the attention on the new façade, NVELOPE’s NV1 cladding support system was specified to hold the vertical cladding in place, and fitted by Kent-based façade installer, Teiko Ltd.

“The project benefited from ECO (Energy Company Obligation) funding, which requires the systems used to be BBA certified, and for the installer to be PAS 2030 certified” comments Adrian Buckmaster, Technical Manager, Teiko Ltd. “NVELOPE is BBA certified and Teiko Ltd is the only installer to be certified for Rainscreen Cladding to PAS 2030 standard.”

A key requirement for this project was to improve the thermal bridging. Thermal bridges cause increased flow of heat and need to be considered in the design and installation of a façade system. Since the fixing of ventilated cladding must go through the thermal insulation into the substrate, it cannot be avoided. It’s therefore important to achieve a thermal decoupling of the substructure from the ventilated façade through thermal separation layers. NVELOPE’s N1 brackets are pre-assembled with thermal isolators which help reduce thermal bridging and also prevent a chemical reaction which could occur between the aluminium bracket and the lime in a concrete frame.

NVELOPE’s NV1 flexible point brackets were well suited for this project as they allow for expansion and contraction of the cladding when under strain from various weather conditions including strong winds. The NV ranges provides a secure fixing solution for façade materials including high pressure laminate (HPL), timber, weatherboard, fibre cement, fibre concrete, ceramic, thin stone, aluminium composite material (ACM) and many other metals. Stand-off sizes for the vertical ranges are from 40 – 300 mm.

NVELOPE holds extensive stock to ensure orders can always be met and where necessary, immediate delivery can be provided. All NVELOPE cladding systems can be engineered to project specific requirements thanks to the expertise of its technical design support service. This provides architects and specifiers freedom with an almost infinite range of façade appearance and layout options.

Manufactured in the UK and developed using the highest specification alloys, NVELOPE products and systems are ideal for supporting a wide variety of façade materials.

For more information please visit www.nvelope.com

The importance of BBA (British Board of Agrément) certification is well-known as an independent mark of approval for suppliers to the construction industry, and Cembrit has the distinction of having its complete range of fibre cement fully accredited by the organisation.

The BBA is the UK’s major authority offering approval and certification services to manufacturers and installers supplying the construction industry. BBA certification is a sought after accreditation, and one which is incredibly important to architects. Cembrit holds five BBA Certificates for its fibre cement slate range, ensuring that whichever system is chosen, architects can be confident in the specified product. To achieve this status, Cembrit fibre cement slates completed a comprehensive testing process and successfully met all the requirements set out by the BBA.

“BBA certification enables architects to specify Cembrit fibre cement slates with confidence,” says Ged Ferris, Marketing Manager of Cembrit. “Our fibre cement slates range provides a high quality roofing finish that is both attractive and long lasting. Architects specify the slates for use on both residential and commercial properties, and have in the past, praised the product for delivering the desired results.”

The Cembrit range of fibre cement slates includes Westerland, Moorland, Zeeland, Jutland and Diamond, all offering their own unique appearance. The slates are ideal for use on conventional pitched timber roofs with a rafter pitch of 20° and over, or hung vertically as cladding on external walls. The slates are complemented by matching fibre cement ridges, ventilation solutions and fixings.

Manufactured to the highest European standards using Portland cement together with a formulation of superior blended synthetic and cellulose fibres, Cembrit fibre cement slates are finished with a high quality, semi-matt acrylic coloured coating to the face and edges and a tinted, high performance binder to the back face. Cembrit fibre cement slates are the most accredited on the UK market.

For further information visit www.cembrit.co.uk, or email sales@cembrit.co.uk

Flat roof manufacturer Bauder launched its revolutionary solar PV mounting system for biodiverse or extensive green roofs, Bauder BioSOLAR, at the inaugural ‘European Biosolar Roof Conference’ that took place in September at City Hall in London. Designed primarily for new build applications where environmentally friendly solutions are required to meet planning and BREEAM requirements; this integrated system addresses the misconception that green roof and PV technologies are mutually exclusive options.

The construction industry has long been calling for rooftop solutions that include a duality of technologies for environmental advantage, and a biosolar roof delivers just that providing reciprocal benefits in terms of maximising the energy output from the PV module and the footprint for the green roof. Bauder’s innovative BioSOLAR system uses the substrate and vegetation to provide the ballasted installation mechanism, removing the need to penetrate the waterproofing to secure the mounting units to the roof and making the most of the available area for vegetation, enabling the entire roof to qualify as a biodiverse green roof.

A key feature of Bauder’s unique system is that the front edge of the polycrystalline PV panel is raised 300mm above the finished green roof level, allowing light and moisture to reach beneath the panels whilst ensuring the mature vegetation will not shade the panels and can be easily maintained. The mixture of sunny, shaded and sheltered areas together with a variable depth of FLL compliant extensive substrate gives a matrix of different habitats that allow a broader range of plant species to thrive, and a rich foraging environment for bees and insects.
The biosolar solution also delivers advantages to the building, as the cooling effect of the vegetation and water held within the green roof system preserves the ambient temperature around the PV array, which in turn increases the solar output by over 5%. The PV mounting frame features a 100% recycled high-density polyethylene base board and consists of just three components – a quick fix angle support, profile module rail and module fixings – that make for an extremely quick and simple installation process.
Although well suited to new build applications, the Bauder BioSOLAR system can also be retrofitted on many existing roofs without the need for any structural modification to the building; and with Bauder able to supply and install all of the waterproofing, green roof and PV elements you can be confident of the significant synergy effects created by this energy efficient and cohesive system.
For more information please visit www.bauder.co.uk

Flexible electric heating is becoming more and more popular in response to the UK’s homes becoming increasingly airtight. Jenny Smith, product marketing manager at Vent-Axia, explains how advances in technology make it an attractive option.

The UK’s heating industry has been in a period of transition ever since the introduction of Part L ‘Conservation of Fuel and Power’ in 2000 which has driven energy efficiency developments to lower carbon emissions and meet UK carbon targets.
At the same time the UK has had to adjust to declining oil and gas reserves. Historically the UK has been fuel rich in the form of gas, but with this in decline electricity generated via other sources becomes vital as we search for a secure and de-carbonised energy supply.
As a result manufacturers of electric heating have developed systems that meet the comfort needs of households and energy efficiency demands of legislation. In addition, increasingly air tight homes mean that heating demands reduce, making flexible electric heating with new controls an attractive option.
Electric heating offers an affordable heating solution for households with low capital and installation costs. The flexibility of the units is an added financial bonus since heaters can be installed as stand-alone heaters or as larger systems.
Using electricity as a fuel the technology is ideal for rural households that are off the gas grid. Meanwhile electric heaters cause little installation disruption since they don’t require the pipework needed by traditional boiler heating systems.
Free of the installation headache of flue siting and pipework, electric heating also has the flexibility to be installed almost anywhere in a room so households locate the heaters where best suits their needs. Almost maintenance free with no moving parts, with electric heating households have the comfort of not needing to worry about costly annual boiler checks.
Ultimately, as we move towards zero carbon homes and a decarbonised energy supply electric heating will become the heating technology of choice. Manufacturers, like Vent-Axia, are ahead of the curve as they prepare for this transition by developing products that meet both the demand and the needs of the market.
This next generation of electric heating offers greater flexibility to households since electric heating quickly warms a room and technological developments mean that accurate controls ensure high energy efficiency.
The new advanced electric heating systems incorporate highly sensitive, integral thermostatic controls. For instance, Vent-Axia’s Opal range of energy efficient aluminium radiators feature dynamic fluid with high thermal inertia and are slim and stylish in design. Featuring controllers that are fully programmable this type of electric heating system offers closer energy management, thus saving money for homeowners.
Ideal for both new build and refurbishment projects the newest electric heating features on-board energy monitors allowing occupiers to see exactly how much energy is being used to heat a room, and thus make an informed decision on thermal comfort.
The inclusion of highly sensitive silent operating digital controlled thermostats accurate to +/- 0.5° allows electric heating to act quickly to maintain consistent room temperature levels, reducing temperature overrun and minimising energy consumption. Allowing homeowners to manage the warmth in their homes to meet their needs the radiators are easy to operate coming with seven heating programs and three temperature settings for comfort, economy and frost protection.
Households can now expect improved efficiency and control across a wide range of electric heating technology. Towel rails are traditionally marketed to homeowners for their aesthetics rather than efficiency. However, the next generation of heated towel rails now quickly and efficiently warms and drys towels while adding to the overall style, temperature and comfort of a room. Vent-Axia’s new range features high quality white or chrome finishes with ten different models, split into flat, curved and designer styles, allowing customers to choose exactly the right towel rails to suit their individual home.
As ever, control is central to the range, with the towel rails featuring an advanced controller offering five heat outputs. Providing an eco-mode ideal for use when drying towels to ensure minimal energy use, the controller turns the rail on full power for 30 minutes and then reduces the output to the user setting for a further 90 minutes, before turning the towel rail off. As a result households have warm dry towels without wasting energy, bringing greater comfort to the towel user but also adding to the overall temperature and comfort of the room.
As we move towards zero carbon homes and a decarbonised energy supply electric heating is set to become the heating technology of choice. Already boasting improved efficiency and control, electric heating offers contractors a technology that promises their customers the operational control, comfort and style they desire.
For further information on all products and services offered by Vent-Axia telephone 0844 856 0590