The new Chancellor Nadhim Zahawi should make re-introducing tax cuts on diesel a priority if he’s serious about tackling construction inflation, claims the National Federation of Builders, NFB.

The trade body said it was renewing its campaign to press for red diesel on building sites where the fuel used to receive a 47 pence per litre rebate.

NFB’s housing and planning policy head Rico Wojtulewicz said: “With fuel thefts rising and diesel now at over £2 a litre, the chancellor must look at giving industry access to red diesel again for a minimum period of twelve months.”

It has been easier to steal fuel now that it is no longer dyed red since the tax rebate was scrapped on the 1st of April.

 

Alternatives to red diesel are limited

Mr Wojtulewicz added the pandemic had meant non-fossil fuel machinery had not come on stream and alternative fuels were not widely available.

“The cost-of-living crisis is pushing businesses into closure. The government doesn’t have many energy-based levers at its disposal but rolling back the awful decision to remove construction and others from accessing red diesel is not only sensible but can be decided overnight through a ministerial statement.”

Finance brokers Hank Zarihs Associates said development finance lenders agreed that reducing fuel prices was a key to helping control soaring building costs.

However, the treasury defended its decision to scrap red diesel as it accounts for nearly 14m of carbon dioxide emissions a year.

Treasury news desk head Sam Clark said: “We recognise too there are unique circumstances currently pushing up prices, which is why in March we introduced the biggest ever cut to all fuel duty rates and we increased the employment allowance.”

 

He added that for firms transitioning away from diesel there is £40m of support available via the department’s red diesel replacement competition.

 

The 47 pence per litre tax rebate on red diesel still applies for certain types of vehicles and machines used for specific purposes in agriculture, horticulture, fish farming and forestry.

Knauf has reached an agreement with Gypfor for the purchase of a new plasterboard manufacturing plant in Newport, South Wales. This multi-million pound investment will increase the UK production volume of Knauf’s range of gypsum-based building materials by 20% when fully onstream in Q1 2023. It is an emphatic demonstration of the Group’s commitment to dry construction in the UK and Ireland markets.

The factory, developed by Gypfor, is located at Associated British Ports port of Newport, allowing gypsum to be offloaded directly, avoiding road haulage. A state-of-the-art facility, it will benefit from green power generated by renewable sources, including wind and solar technologies, reflecting Knauf’s determination to reduce the carbon emissions associated with large-scale manufacturing. The plant will also have on-site recycling as part of its commitment to the circular economy.

Managing Director of Knauf UK Ian Stokes is delighted with the move. “This new plant will significantly increase our ability to service customers throughout the UK, and particularly those in South Wales, the Midlands and the South-West of England. It is a very exciting move for Knauf and, following recent investment in increasing the capacity of Knauf Insulation, reflects the confidence of the Knauf Group in the UK construction sector.”

Construction of the facility is progressing well, with commissioning due to begin later this year. Planned to be fully operational in early 2023, the plant will create some 54 local jobs, making it a welcome addition to the South Wales economy. Knauf will manufacture a broad range of gypsum boards in Newport, adding to the capacity of its existing plants in Immingham and Sittingbourne.

CLICK HERE FOR THE KNAUF WEBSITE

 

 

Since it was introduced in 2013 the European safety standard EN 16005 remains a key standard to be followed to ensure pedestrian safety at automatic doors. Considered to be a more onerous standard it defines the responsibilities of all those in the construction industry from manufacturer to end user and including architects and contractors.

 

GEZE UK has revised and updated its popular and informative RIBA-approved CPD Safeguarding Pedestrians from Accidents at Power Operated Doorsets.

The 40-minute seminar looks at the European standard EN 16005 in detail and explains the responsibilities of all involved to ensure safety and compliance at all stages of construction.

It explains everything from activation distances for escape routes and non-escape routes; the danger points of automatic sliding, swing and revolving doors and how safety features such as finger guards and protection leaves can be used to reduce the risk of injury; and looks at revolving doors which are potentially the most dangerous and which received the most significant changes.

It is intended for Chartered members of RIBA but is also suitable for facilities managers, property managers and contractors.

Offering architects and specifiers invaluable advice and guidance, which contributes to their continuing professional development, this updated training seminar gives a better understanding of the standards and regulations surrounding pedestrian safety at automatic doors. The seminar is included in RIBA’s core curriculum: Design, Construction and Technology; Health, Safety and Wellbeing; and Legal, Regulatory and Statutory Compliance for the General Awareness knowledge level.

It can be presented in person or virtually via a variety of online platforms and at a time to suit, usually lunchtime but breakfast seminars or afternoon sessions can be accommodated.


To find out more or to book a CPD seminar, CLICK HERE TO EMAIL

or CLICK HERE TO visit the cpd page


 

National Specification Manager Richard Richardson-Derry said: “Automatic doors are a machine and just like any machine they can cause harm if not used properly, however we cannot expect pedestrians who may not be so familiar with them to be aware of the potential danger, therefore those of us in the industry need to take responsibility and ensure they are safe for all to use.

This CPD explains how to do just that and that if we all play our part we can limit or even eliminate accidents at pedestrian doors.”

RIBA Chartered Architects are obliged to undertake a minimum of 35 hours a week to maintain their competence. Visit www.architecture.com for more information on those obligations.

Other presentations offered by GEZE UK, include Specifying, Installing and Maintaining Ironmongery for Fire Doors; Designing Effective Natural Heat and Smoke Ventilation; and Removing Barriers to Access.


For more information about GEZE UK’s comprehensive range of

automatic and manual door closers

call 01543 443000

or visit www.geze.co.uk    

 

Schüco is delighted to announce the winners of its esteemed Excellence Awards which were presented in the impressive setting of Whitehall’s Banqueting House by architectural designer and television presenter, Charlie Luxton.

Held in association with Architecture Today, the awards are an established part of the architectural calendar and attract a wide range of high-calibre projects. The awards celebrate the innovation and close collaboration between design teams and contractors that successful building projects demand.

The award categories were updated slightly this year and included residential, commercial, mixed-use, education, healthcare and leisure buildings, both newbuild and refurbishment and adaptive reuse projects. The judges assessed each entry against four key criteria: creativity, innovation, technical skill and creative collaboration.

Every year one exemplar building is crowned Overall Winner. This year that honour belongs to Master’s Field Development in Oxford by Níall McLaughlin Architects, in collaboration with specialist contractor Alucraft Systems.

 

The Master’s Field Development for Balliol College, University of Oxford, comprises 225 furnished ensuite study bedrooms arranged across eight new buildings and supported by ancillary facilities and a new sports pavilion.

Schüco doors, together with Schüco windows incorporating bespoke aluminium spandrels, provide a range of fenestration supporting the buildings’ natural ventilation strategy.

Speaking about the building, Pankaj Patel, Director of Patel Taylor and one of the award judges, said: “The project is a beautiful essay in how to build in a sensitive context. The highly refined façades use Schüco windows to striking effect.”

The awards also featured the coveted People’s Choice award, voted for by attendees on the day. This year that accolade went to the Fire Station Auditorium in Sunderland. The flexible, three-storey music venue was designed by Flanagan Lawrence, working with specialist contractor Entec Design.

Pete Temprell, Managing Director of Schüco UK and Ireland said: “The Excellence Awards celebrate the very best in architecture and façade design. Successful façade design is dependent on many factors, from ensuring good energy performance and natural lighting to meeting demanding aesthetic and technical criteria. The winning projects all demonstrate this superbly.

“Our congratulations go to all our award winners whose combined skills, knowledge and experience have achieved such impressive end results.”

 

For full details of all the Schüco Excellence Awards 2022 winners, CLICK HERE

 

 

 

Boris Johnson set to be investigated over his election pledge to build 40 new hospitals

The National Audit Office (NAO), the Government’s spending watchdog is planning a ‘value for money review’

Boris Johnson is set to be investigated over his election pledge to build 40 new hospitals by 2030 is facing a review by the Government’s official spending watchdog.

The National Audit Office (NAO) is planning a “value for money review” into the entire scheme, which formed part of Conservative party’s 2019 general election manifesto.

The NAO is concerned that despite the Prime Minister’s pledge to build 40 new hospitals, so far there has just been alterations or refurbishments to existing hospitals.

The investigation was revealed in a letter to shadow health secretary Wes Streeting from NAO comptroller Gareth Davies after the Labour MP warned of a waste of taxpayers’ money.

Mr Streeting has called for an investigation into delays surrounding the programme.

The Labour MP said many NHS trusts are still awaiting funds to be allocated and many are in fact alterations or refurbishments not “new hospitals”.

In the letter first reported by the Observer, Mr Davies responded: “I can confirm that I already have plans to start a value for money review of the New Hospitals Programme later this year and to report my findings during 2023.

“I have passed your letter to my Health Value for Money team so it can consider the specific issues you raised as it develops the scope of the review.

“In particular, I note your comments about the implications of delay for increasing costs at this time of high inflation and the matter of whether all projects truly meet the classification of ‘new hospitals’.”

The NAO’s work threatens to cast further doubts over Mr Johnson’s ability to deliver on his promises, as he fights a series of scandals including partygate and allegations of sexual misconduct levelled at Tory MPs.

Commenting on the investigation, Mr Streeting said: “The only place these ’40 new hospitals’ currently exist is in Boris Johnson’s imagination.

“The election manifesto promise now looks to be another example of the Conservatives overpromising and underdelivering.”

The Conservative manifesto clearly stated that they would “build and fund 40 new hospitals over the next 10 years”.

 

Source: Inews

A record number of solar schemes are in the planning pipeline, from the outskirts of Hull to huge sites in the Wolds, but not all have been welcomedA boom in new solar energy schemes is set to change the face of the East Yorkshire countryside.

Over a decade ago, a series of large onshore wind farm projects created the first wave of a renewable energy revolution in the area. However when government subsidies for onshore schemes were slashed in 2015, the pace of change slowed down.

Now things are picking up again but with a focus on solar power rather than wind. At the moment, no fewer than 22 separate planning applications for solar-related developments are lodged with East Riding Council.

They range from what is potentially one of the largest solar developments in the region at a 370-acre site near Pocklington to plans to install rooftop panels at the Aldi supermarket in Cottingham and a solar-powered electric vehicle charging hub next to a new drive-through coffee shop on the eastbound A63 near North Ferriby. Other large-scale solar farm proposals currently include a 170-acre scheme near Hedon and a slightly larger 185-acre development featuring ground-mounted panels and battery storage units at Tickton near Beverley.

The proposed Soay Solar Farm and Green Grid Park at a site between the villages of Allerthorpe and Thornton near Pocklington is being promoted by Norwegian state-owned Statkraft, Europe’s largest producer of green energy. If approved, the £125m development would be capable of generating enough electricity to power around 18,500 homes once fully operational.

Alongside ground-mounted solar panels would be a separate facility known as a Green Grid Park. It would be designed to allow a more flexible use for the electricity being generated at the site, including storage for later release at times of peak demand to reduce the risk of blackouts.

With an existing connection to the National Grid already nearby, it also fits into the wider picture of the UK’s attempt to shift away from a reliance on international fossil fuel energy. This homegrown approach has been highlighted by Russia’s invasion of Ukraine and the subsequent issue around Russia’s oil and gas contracts with other countries.

Like the previous series of approved onshore wind farm schemes in the East Riding, the latest wave of solar farm applications is generating a mix of local support and opposition. Tickton and Routh Parish Council has backed the scheme on its doorstep but a similar proposal in nearby Wawne has prompted objections with some residents raising concerns over potential construction traffic and long-term site security.In the submission, the trust’s planning ecologist Ellen Milner says:

“Yorkshire Wildlife Trust is compelled to object to the proposed development as the proposed habitat creation and enhancement plans do not present the best outcome for nature at this location. Lowland dry heath is an exceptionally rare and endangered habitat in Yorkshire and it is the naturally occurring habitat in the area of the proposed development.

“The proposed habitat creation plan intends to create grassland and scrub habitats at this location. However, the creation of such habitats is alien to this location and runs contrary to both the ecology of the area and a myriad of ecological and planning regulation and best practice. Further, the creation of grassland and scrub habitats would deny the opportunity to create lowland dry heathland habitat at the same location, the creation of which would significantly expand the area of one of Yorkshire’s rarest habitats.”

Allerthorpe Parish Council has also submitted an objection, describing the proposed development as “unacceptable in terms of size and scale” . The council claims it would have a” “negative impact” on the surrounding countryside and the village itself., not least because the whole site would be surrounded by a 3.4m high metal fence.

Like the onshore wind farms before them, solar farm developers face the challenge of striking a balance between the need for cleaner energy and finding the right location for the facilities to generate it. And once again, the villages and green fields of the East Riding will be in the spotlight as they do so.

 

Source: Hull Live

Global engineering company, Renishaw is to invest over £50 million at its Miskin site in South Wales to increase manufacturing capacity and to help meet its Net Zero emission targets.

This will see 400,000ft² (37,000m²) of additional low carbon buildings created at the 193-acre site to the west of Cardiff, consisting of two new production halls and an employee welfare facility. The existing production halls will also be refurbished to reduce their greenhouse gas (GHG) emissions.

Planning permission for the detailed plans to almost double the footprint of the site, which was acquired by Renishaw in 2011 and currently accommodates 650 employees, was granted by the Vale of Glamorgan Council last year. With the company continuing to see strong business growth and have confidence in its long-term prospects, those plans will now be realised.

This significant investment will give Renishaw the additional manufacturing capacity required to meet its forecast sales growth in the coming years and will also enable it to help achieve its 2028 Net Zero target for Scopes 1 & 2 GHG emissions.

The construction will be completed in phases, with a 15-month programme of work starting in July 2022 to build the first of the new halls (188,800ft²/17,540m²), the welfare facility and supporting infrastructure. The basic shell for the second new production hall (195,800ft²/18,190m²) will be built by December 2024 and will be fully constructed when business levels require its use.

The details of the operations that will take place in each of the new halls is yet to be fully determined, but the additional capacity will allow for increases to machining operations and the assembly of products already built at the site, including Renishaw’s metal additive manufacturing (3D printing) machines.

A vital consideration for the construction programme at the Miskin site is the achievement of Renishaw’s Net Zero Scopes 1 & 2 GHG emissions targets. Therefore, the new facilities will be built with the latest technologies and materials to ensure that they will be Net Zero in operation, and the build will also aim to minimise the amount of embodied carbon within the building materials used in construction.

By the end of 2024, the company also aims to have refurbished the two existing halls at Miskin to reduce their carbon emissions including new energy-efficient cladding and the replacement of existing heating systems. These sustainability investments complement initiatives at the company’s other global sites, including large investments in roof-mounted solar panels, new car port solar panels, and feasibility studies to assess the viability of wind power.

Speaking about the new investment, Gareth Hankins, head of global manufacturing said: “The last two years have highlighted the importance of in-house manufacturing for Renishaw and the control that this gives us in meeting our quality, cost and delivery targets. This significant investment by our Board to increase the Group’s production capabilities demonstrates a huge vote of confidence in our manufacturing operations and people, at an exciting time for the business.”

 

Source: Production Engineering Solutions

The Competition and Markets Authority has provisionally found that ten construction companies have been involved in “illegal cartel agreements” when submitting bids.

Following an investigation launched in 2019, the Competition and Markets Authority (CMA) has provisionally concluded that the firms colluded on prices through illegal cartel agreements when submitting bids in competitive tenders for contracts.

The discovery relates to 19 contracts worth over £150 million, involving demolition work at the Met Police Training College, Selfridges and Oxford University, amongst others:

 

  • Bishop Centre
  • MPS Training and Operations Centre, Hendon
  • Southbank, London
  • Bow Street, London on 2 separate occasions
  • Station Hill, Reading
  • Lots Road Power Station, London
  • Duke Street, London
  • Lombard House, Redhill
  • 18 Blackfriars Road, London
  • Underground car park, High Wycombe
  • 33 Grosvenor Place, London
  • Wellington House, London
  • Ilona Rose House, London
  • 44 Lincoln’s Inn Field, London
  • 57 Whitehall Old War Office, London
  • 135 Bishopsgate, London
  • Civic Centre Scheme, Coventry
  • Tinbergen Building, Oxford.

 

Michael Grenfell, the CMA’s Executive Director for Enforcement, said: “The construction sector is hugely important to Britain’s economic wellbeing. Bid-rigging can result in worse deals, which can leave businesses – and sometimes taxpayers – out of pocket.

“This is unacceptable, and the CMA won’t hesitate to come down hard on these activities and impose appropriate fines.”

 

Cover Bidding

 

The bids were rigged with the deliberate intention of deceiving the customer that they were competitive. However, one or more construction firms agreed to submit bids that were deliberately priced to lose the tender.

This practice, known as cover bidding, can result in customers paying higher prices or receiving lower quality services.

 

Provisional Findings from the CMA

 

The CMA has also provisionally found that seven of the firms, on at least one occasion each, were involved in arrangements by which the designated “losers” of the contracts were set to be compensated by the winner.

The value of this compensation varied but was higher than £500,000 in one instance.

Some firms produced false invoices in an attempt to hide this part of the illegal behaviour.

The CMA is keen to point out that not all of the firms were involved in colluding in each of these contracts, and not every contractor who submitted a bid for these contracts was involved in the illegal collusion.

Eight of the firms have admitted their involvement in at least one instance of bid-rigging between January 2013 and June 2018. These are: Brown and Mason, Cantillon, Clifford Devlin, DSM, J F Hunt, Keltbray, McGee, and Scudder.

Two other firms, Erith and Squibb, have not admitted their involvement in any bid-rigging.

Scudder and McGee reported their involvement under the CMA’s leniency policy and will benefit from a discount on any fine, provided they continue to comply with the policy.

 

Source: This week in FM

Not all finger protection devices are made the same – that’s the message from Strand Hardware which is urging customers to apply the “gold standard” for safety and durability.

BS 8613 specifies requirements and test methods for durability, strength and effective function of finger protection. This includes assessment of durability and effectiveness applied to conditions and temperature.

But not all products sold in the UK meet this standard. In recent years, the market has been flooded by cheap imports, many with components that are far from durable. Often made from plastic, they can become brittle and break, becoming a hazard in themselves.

As the UK’s market leader in the supply of quality finger protection, Strand Hardware only stocks products that ‘meet the mark’.

All BS 8613 products must clearly bear manufacturers markings and classification – making them easy to identify.

Said Strand Hardware’s Sales Director Craig Fox: “None of our stock can be defined as ‘one product fits all’. Our extensive range provides a range of devices for various door materials and applications. We prefer to work closely with customers to provide the ideal solution for their project needs.

In addition to product durability – some products come with a lifetime guarantee – there are other benefits to buying quality: bespoke sizes for items up to 2500mm and special RAL powder coated finishes for customisation.

Often buying choices come down to budget but safety should never be compromised, added Craig.

“When it comes to finger protection, don’t be tempted to buy cheap. It makes sense to buy once and buy quality.”

BS EN 8613: 2017 defines finger protection as “a device intended to minimise the risk of crushing injuries to fingers in the gap between the hanging stile of the door leaf and the door frame”.

 

In premises that are used by the public – especially children, the elderly or vulnerable adults – retail establishments, schools, hospitals, care homes and health centres it is essential to minimise risk.

When it comes to the development and management of commercial buildings, risk assessment and identification of appropriate solutions is essential.

British and European standards provide specifiers, architects/designers, health and safety professionals and facility managers with guidance as to what works well, what type of devices should be applied to various door sets, what’s durable and essentially, what is safe to use.

It is estimated that between 40,000 and 80,000 accidents occur every year, mainly involving children who trap their fingers in doors, leading to serious injury, and in some cases amputation. Many more minor injuries are believed to go unreported.

The standard is a benchmark to which professionals can refer, fulfilling a duty of care with an understanding of appropriateness and performance values. It also assists manufacturers to design fit-for-purpose products.

There are various types of finger protection devices available, some are integrated within the door system, others cover the gap between door and frame.

For more information on finger protection or assistance with specification contact

CLICK HERE

or call: 01922 639111

www.strandhardware.co.uk

The proposed HS2 scheme in Manchester would see railways built on top of huge concrete stilts

Leaders in the north have warned that the Government has a once-in-a-lifetime chance to make the right decision for Manchester’s HS2 station – but that ministers are on the cusp of wasting it. And as the HS2 Crewe-Manchester Bill is prepared for a second reading in parliament, they have issued an urgent appeal to give the region the hub it needs to thrive over the next 120 years.

Bev Craig, leader of Manchester Council, has stressed that the high speed rail line from London to Manchester, due for completion in 2040, is vital to unclog network capacity, improve connections between the North, West Midlands and London, and boost economic growth. However, she is joined by other leaders, rail experts and industry leaders in her plea that the Manchester station is built in the best way – and that means going underground.

It also means a rethink on the current plan for an overground turn-back station on the northern flank of the existing Piccadilly station, which, say its critics, will:

  • Wipe out the potential for future east-west links by hitting full capacity from day one
  • Swallow up 500,000 sq metres of prime development land
  • Crush the potential for 14,000 new jobs
  • Cut Metrolink lines for years
  • Leave a city centre region severed by viaducts and ugly concrete structures
  • Snub leaders’ carbon neutral, clean air and public transport plans with huge multi-storey car parks for 2,000 cars

Meanwhile, swathes of land will be turned into building sites during construction – causing huge disruption and wasting the potential for a further 2,600 jobs. Passengers will exit the hub into an area currently housing the bins and the back of Greggs.

The current Bill sees HS2 emerge from the ground in Ardwick before travelling on a mile-long viaduct of up to 12 metres in height to reach the new surface station. In order to then connect up to Leeds, it will have to turn back on itself and leave Piccadilly on more viaducts across east Manchester towards Yorkshire.

Bev Craig, leader of Manchester City Council, told the Manchester Evening News : “HS2 for me is a real opportunity not just for Manchester but of the north more broadly. That’s why it has to be done properly.

“It’s currently being proposed that HS2 runs underground until it comes out of the ground on huge concrete stilts and runs above ground into the city centre. No other European city would start by building rail infrastructure on concrete stilts. It’s an outdated notion of urban planning, more reminiscent of the 1970s than what we want to see in 2040.

“You would not see a scheme like this proposed in London, or another city in the south east. So why should Manchester have to deal with something that’s substandard from day one and that doesn’t deliver on the rail opportunities that HS2 gives?”

She added: “I am strongly of the opinion that what’s been planned by the Government at the moment is the wrong plan to maximise the benefit of HS2 to Manchester.”

Coun Craig is among leaders pushing for an underground station, built in consultation with passengers and businesses here. With trains arriving on HS2 from the south and Midlands, passengers could connect via through-platforms for their onward travel across the north. Boosting potential for capacity, it would provide an alternative to car travel, reducing carbon and NO2 emissions.

An underground station, and the demolition of Gateway House, say its proponents, would free up the land above, on the border of Ardwick and the city centre, for homes, businesses, open parks and a welcoming public plaza and boulevard.

With the Government’s plan, trains will have to turn around to leave. One rail insider told the Manchester Evening News : “The design is such that in order to use the platforms effectively, train drivers are going to have to get out of the train and sprint to the opposite end to get away on time. We’re going to need very fit train drivers.”

Crucially, a surface station means the Government’s cut-price Northern Powerhouse Rail – downgraded in Grant Shapps’ Integrated Rail Plan (IRP) in November last year – could not be brought back to life in the future as the hub will hit full capacity from day one.

Coun Craig added: “Manchester has long opposed the cutbacks to Northern Powerhouse Rail. We want that door to be open for the future and the underground station allows us to do that. This allows us not to be full at day one and allows us the opportunity, should a government in future listen to us around our concerns of connectivity from one city to another, to use that platform.”

Graham Stringer, former leader of Manchester City Council and MP for Blackley and Broughton, said the cut-price plan will ‘economically sterilise’ parts of the city, adding: “There is no doubt we are getting a second class link to HS2 in Manchester. By not going into tunnels they are reducing the ability of people travelling east-west. This symbolises the Government’s attitude to the north.”

Analysis by the council shows the surface station will rob the city’s economy of £333m a year by 2050, compared to an underground hub. But the Government has dismissed this optimal choice on the grounds that it will set them back, according to High Speed rail director general Clive Maxwell, £5bn more. Yet no evidence of this costing has been provided – sparking a call from Mayor Andy Burnham for Westminster to share the maths behind the figure.

Meanwhile, a second station at Manchester Airport is as yet unfunded, with HS2 bosses demanding that the region pay its own way. As there are currently no plans to connect the Airport HS2 to Metrolink, passengers will have to come off a high speed train only to board a shuttle bus to take them to the airport. It’s been questioned whether travellers coming into other cities in the country would be expected to do this.

Other concerns around the airport station include the risk of blocking a future tram-train route to the south-west, as well as the design for highways access to Manchester Airport station, particularly at Junction 6 of the M56, which experts say does not take into account future demand for Northern Powerhouse Rail, airport growth and planned development. Soil-lugging HGVs are also a concern, with no plans for materials to be supplied and removed using rail at the hub.

Mike Kane, MP for Wythenshawe and Sale East, described the fact that the Government has plunged cash into Birmingham’s airport station but is refusing to do the same for Manchester as ‘outrageous’, adding: “All that funding happening down south and yet they are scrimping and saving over the best deals in the north of England. There are also major issues with connection to the airport and the orbital tram network. The airport will be at least a mile away.”

Lucy Powell, MP for Manchester Central and Shadow Secretary of State for Digital, Culture, Media and Sport, said: “The plans for HS2 at Manchester Piccadilly need looking at again. It won’t future-proof the station for further high speed with NPR. The loss of development land and the impact on the area nearby, including the run-in to the station, is not acceptable.”

Mr Burnham called on MPs across the North of England to ‘fight hard’ to change the latest proposal. He said: “While I support HS2 in principle – I always have – patience is wearing thin. I would say to the government that our support can’t be taken for granted because what we have in the bill was very different to what we were first promised.

“There can be no guarantees that we will support this bill, or ask Greater Manchester MPs or indeed the Labour frontbench to support this bill, if there is no change. If it stays exactly as it is, that is a very difficult situation and it’s not what we were promised.”

Greater Manchester’s business community is backing the fight for the best stations for the region – and its economy. Coun Craig added: “They have not even shared the workings on how they get to £5bn for Piccadilly. As a leader of a modern city, for Manchester to do well we need to thrive. I’m not in the territory of pitching Manchester versus London.

“I think it’s a good thing that the country spent £19bn on Crossrail. It shows what’s possible. That’s why it’s more important when other cities are asking for things – not because they are asking for handouts – but because we genuinely think we can contribute to the UK’s economy through proper infrastructure investment.

“Why can’t we have the level of ambition that we have for the capital in other cities in this country? We are not just talking about creating a good economy for Manchester, it’s part of what will see the UK economy succeed. But it can only succeed if it succeeds outside of London.

“This isn’t public services asking for more money, this is businesses, residents – the whole economic plan for the future of the country. We need more competing and thriving cities that can compete across Europe rather than just hedging your bets on the capital city.”

Coun Craig is asking that the Government consider the issues raised by leaders, that costs are worked out in partnership, challenges met through co-operation – and that their concerns are considered seriously. On the £96bn being invested in the region’s rail network, she added: “It’s a lot of money. History has taught us that Government’s don’t invest outside London at this scale very often and that’s why absolutely need to get it right.”

Work by the technical consultants Bechtel, hired by the council in 2019 to look at the potential options for Piccadilly, concludes the Government had tacked on NPR as an ‘add-on’ rather than finding the most sensible solution. Bechtel concluded a six-platform underground ‘box’ solution, aligned at a better angle for services to continue on through to Leeds, would be a more sensible alternative. It also pointed out that this solution was already happening just to the west of London, in Old Oak Common, where a state-of-the-art underground HS2 station is in the process of being built.

Meanwhile, it’s understood that senior figures in the rail industry and the civil engineering community – including those who have worked on HS2 – have been left flabbergasted by the decision to shelve the underground option.

One engineer who has worked on the HS2 project, told the Manchester Evening News : “I cannot imagine how on earth they came up with the £5bn figure. That’s not being spent on Euston in London. Regardless, for the sake of what ultimately is quite a small amount of money, this is a major sacrifice to the capability of this project to release capacity for passengers.”

He added: “There will be no above-ground blight at Old Oak Common. Manchester already has the blight of above-ground viaducts. People in Manchester know what that does, it isolates communities, it’s not a good way to smash up a city. That area will end up going to lower-value homes and it’s people on lower incomes who will suffer. Is that really right?”

There are other issues with the Government’s plan for HS2 at Piccadilly. Multi-storey car parks for 2,000 vehicles fly in the face of Manchester’s Strategic Regeneration Framework and public transport and clean air ambitions, while Chancellor Lane, one of the main road arteries into the city centre from Ardwick, will have to be closed for good and a huge new road interchange built at Pin Mill Brow. Leaders say this will encourage car travel and increase pollution, sever areas of the city – and put at risk the proposed tram train extension to Metrolink. Works will also mean the full closure of the Metrolink Ashton line, with passengers forced on to a replacement bus service for two years.

The chosen plan is also missing an adequate interchange for cycling, bus and coach parking facilities, as well as scope for onward connections. Another rail insider added: “The whole thing is like building a really good motorway with no slip roads. It needs to be looked at holistically, there needs to be thought around how you are going to get people to use the station. You need to be able to get off it. From day one, there’s no resilience if anything goes awry.”

Following the second reading of the Hybrid Bill, all parties have 25 days to submit their petition to Government. These objections are then seen and considered by a Select Committee as the bill goes through parliament.

Transport secretary Grant Shapps has previously denied in the House of Commons that rail routes would be raised on viaducts coming into Piccadilly. In answer to Blackley and Broughton MP Graham Stringer in November, he said HS2 ‘will not be on stilts coming in’.

“Of course, we can only spend the same money once and we need to spend it as wisely as possible,” he added of the Piccadilly plans.

“If we spend £6bn or £7bn building the station underground at Manchester, we will take away from Liverpool, Leeds, Hull or some of the other places that are calling for money.”

“It is also entirely incorrect to claim Government prioritises infrastructure in London and the South East. HS2 has received ten times more funding than London’s Elizabeth Line and is a project the scale of which we have never seen before.”