Is this the world’s fastest brickie?

2016 update: Whilst the below video is undoubtedly impressive and a true demonstration of skilled handiwork, many of you quite rightly pointed out that the subject is not technically a brickie, as laying a brick pathway is totally different to building a brick wall using mortar. We decided to see if anybody else was worthy of the impressive title of “the World’s fastest brickie” and soon came across an amazing story about Paul Baker, an 85-year-old Wadalba man who has previously suffered a broken neck, a major hip replacement and carpel tunnel operations on both hands, who this year attempted to enter the Guinness Book of Records as the world’s fastest bricklayer.

In May last year Mr Baker attempted to lay 1,000 bricks in one hour, a target set to beat the current record of 914 bricks laid by Bob Boil in 1987 – an American man half his age. Paul got off to an amazing start, laying 400 bricks within the first half hour. However, shortly after tiredness began to take hold and once the hour was up the total number of bricks he had laid was 756, somewhat shy of the current record.

Whilst Paul fell short of entering the Guinness Book of World Records, he did surpass the American National record of 644 laid by Jerry Goodman. “I was very happy with that” said Mr. Baker following the attempt.

So perhaps not the “World’s Fastest Brickie”, but certainly worth a mention. Well done Paul! See a video of his attempt here.

Original story:

A viral video is currently doing the rounds in the construction industry, capturing what many are beginning to call the world’s fastest workman in action.

Captured on camera in Essex the bricklayer is recorded by a co-worker assembling a driveway in super quick fashion and dropping 154 bricks in the unbelievable time of just one minute 40 seconds – that’s a laying speed of more than 90 bricks a minute or 8 bricks every 3 seconds.

Is this the fastest workman in the world? Watch video below:

In a race against a robot, it’s difficult to say which one is the fastest.

What do you think? Let us know your thoughts in the comments section below!

/by

Construction activity declines in Q3

The latest ONS figures, released this week, highlighted a decline in construction activity during Q3. Output in the construction industry was 2.2% lower than in Q2 and 0.1% lower than a year ago, and was 4.3% lower than the pre-recession peak.

Dr Noble Francis, Economics Director at the Construction Products Association, put the data into context: “The fall in construction output in Q3, compared to a year ago, was the first annual fall since 2013 Q1. Skills shortages have been a key issue recently in the industry and are hindering growth, especially in house building. Where skilled labour is available, wage inflation has also been a serious issue, hindering the viability of many sites.

“In the private commercial sector, the largest construction sector, there are still many projects in the pipeline due to contracts that were signed 18-24 months ago. However, sharp rises in costs since then, due to a lack of skilled labour, have adversely affected margins and meant that many projects are on hold for the moment whilst contractors go back to clients and renegotiate prices.”

“Overall, recovery is never a straight line and there are always a few bumps and scrapes along the way. Projects in the pipeline across most construction sectors suggest that activity in the industry will rise in 2016 and our forecasts anticipate 4.2% growth in total construction next year, driven by recovery in house building, commercial and infrastructure activity. Skills shortages, however, are proving to be a key issue constraining growth for the industry.”

/by

UK faces bleakest construction skills shortage in nearly 20 years

The latest RICS UK Construction Survey shows that the country’s skills shortage has reached its highest levels since the survey was launched 18 years ago, with bricklayers and quantity surveyors in shortest supply. Over half of respondents (53%) reported difficulty sourcing labour, with 71% saying they had particular difficulty sourcing bricklayers and 64% highlighting a shortage of quantity surveyors.

During the same period in 2011, just 1% of respondents were struggling to find bricklayers and only 15% noted a shortage of quantity surveyors.

In addition to labour supply, 69% of firms said that financial constraints, such as access to credit, were among the biggest constraints to growth, while 60% said that regulatory and planning issues were potent constraints.

However, despite these challenges, the survey shows significant areas of growth, with the number of new construction projects increasing, particularly in private housing and commercial sectors. While official figures (which are often subject to revision) highlighted a slight contraction in output over the three months to August, a substantial proportion of respondents to the RICS reported an increase in their workloads (net balance +39%), with 29% of firms saying that they were operating at full capacity.

The private housing and commercial sectors continue to lead the growth in workloads with net balances of 47% and 46% respectively reporting an increase. However, momentum was least firm in the public sector with net balances of 12% and 21% reporting growth in workloads in the housing and non-housing segments respectively.

Meanwhile, in the infrastructure sector, growth accelerated somewhat with a balance of 34% seeing workloads rise, up from 25% last quarter.

RICS Chief Economist, Simon Rubinsohn commented on the survey “While it’s exciting to see that the UK is experiencing growth across the construction sectors, future growth will only be sustainable if the growing skills crisis is addressed. The availability of both blue collar and white collar construction workers is reaching crisis point. We haven’t witnessed a labour shortage of its kind in nearly 20 years. Without the relevant skills, we will not be able to grow many of the Government’s priority construction sectors such as infrastructure.”

“Currently, while we know that there is a serious shortage of skills, we don’t yet know why we have seen such a dramatic drop in the labour market over the past five years. Part of the problem is the legacy of the collapse in the sector following the onset of the Global Financial Crisis. Many professionals and other skilled workers chose to leave the industry and quite simply have not returned or been replaced. A real focus on attracting more young people into the industry is critical alongside an expansion of apprenticeship opportunities.”

/by

Morgan Sindall receive award for improving the image of construction

Morgan Sindall – one of the UK’s leading construction, infrastructure and design businesses – has been recognised for its long-term commitment to improving the image of the construction industry.

The company, winner of over 300 Considerate Constructors Scheme National Site Awards, has become the third constructor to register 3000+ sites with the Scheme.

The 3000th milestone registration was for the £30m redevelopment of 55 Colmore Row – a prestigious landmark in central Birmingham. The redevelopment is expected to be completed by Autumn 2016 and will provide 160,000 square feet of Grade A office space, including three new floors added to the top of the building.

Morgan Sindall strives to care about its appearance, respect the community, protect the environment, secure everyone’s safety and value its workforce – the key principles of the Scheme’s Code of Considerate Practice. The company was one of the first constructors to join the Scheme in 1997 and became an Associate in 2007. Associate Members are companies who have proved their commitment to the Code through a high number of consistently high performing registrations.

Considerate Constructors Scheme Chief Executive Edward Hardy commented: “Morgan Sindall’s milestone achievement acknowledges the long-standing commitment they have made towards improving the image of the industry.

“Through supporting the Scheme and its aims, they play a pivotal role in driving the industry forward and setting the standard for others to follow. The Scheme looks forward to recognising more milestone achievements with other contractors, as the industry and public continue to realise the benefits that being part of the Scheme brings.”

Pat Boyle, Managing Director for Construction at Morgan Sindall said: “I am very proud to accept this milestone award on behalf of all of our employees, which demonstrates our on-going commitment to being a considerate constructor.

“As an Associate Member, the Considerate Constructors Scheme is fundamental to the way we manage our construction projects and engage with communities. We strive to go above and beyond the Scheme’s Code of Considerate Practice and our ultimate aim is to leave a positive Morgan Sindall legacy long after project handover.”

Ben Cushway, Contracts Manager at Morgan Sindall added: “The Colmore Row project team is delighted to be the 3,000th Scheme site registration for Morgan Sindall. Given the city centre location of the project, being a considerate constructor is paramount to its successful delivery.

“The Scheme provides additional focus for us to consider the project’s wider impacts on the local community, our workforce and the environment. We take pride in working with the Considerate Constructors Scheme to continually improve and develop the benefits we provide to the local and wider community by offering a positive and safe experience to all.”

/by

Swish Building Products seals the deal with ALMO

Swish Building Products has been named roofline and rainwater supplier for a rolling refurbishment programme by ALMO, Your Homes Newcastle (YHN). Supplied and installed by Swish Approved Installer JDP Contracting Services, the Swish roofline and rainwater systems will be installed on around 500 homes per year.

YHN demanded an ‘equal or approved’ product in response to its performance specification. The contractor selected the products which best fitted the criteria. “We are very happy with the Swish products and have recently started using the Sustainable Rainwater range which contains a high percentage of recycled content,” commented Tom Jarman, environmental sustainability coordinator, property services for YHN. “In using this particular range of products we are able to fulfil our environmental commitments. Also we are now starting to replace older PVC-U products so in buying rainwater goods with recycled content we are helping to ‘close the loop’ when the waste items are taken away.”

Swish’s Sustainable Rainwater products contain up to 84% recycled content, a combination of old windows and guttering systems. This can save up to 70% in CO2 output during the production process when compared to 100% virgin material. The products are two-tone; the recycled material is grey and is co-extruded with an outer skin of virgin material, avoiding the unnecessary use of additional colouring agents. Co-extrusion improves the aesthetics of the product and allows installers to achieve a colour match.

The use of the Gateshead-based collection depot meant that the product choice also supported local employment, an important factor in meeting the ALMO’s social responsibilities.

YHN reached Decent Homes Standard in 2012 so now all its work is lifecycle replacement. The roofline and rainwater products are being installed in conjunction with its rolling re-roofing programme, replacing timber and asbestos cement products. “The reason behind the replacement was maintenance,” continues Tom. “We wanted to cut right back on the level of painting required; in doing so we would not only withdraw the cost from the maintenance programme but also reduce the overheads associated with it, scaffolding for example. Swish’s PVC-U products have allowed us to achieve this.”

Swish roofline and rainwater products have been fitted on 300 YHN homes with a further 230 currently underway. The refurbishment of 300 more homes is planned for the remainder of 2015 as part of an ongoing schedule of works.

YHN manages council houses on behalf of Newcastle City Council. Established in 2004 with the specific target of meeting Decent Homes Standard, the ALMO now manages around 30,000 properties. One of its main objectives is to ‘make the money deliver’, the use of low maintenance products like those available from Swish Building Products go some way in helping to achieve this.

For more information on Swish Building Products’ full range of rainwater, roofline and cladding products visit www.swishbp.co.uk or call 01827 317 200.

/by

ROCKFON launches their whitest ceiling tile ever: ROCKFON® Blanka™

After years of research and testing with architects and installers, ROCKFON has developed their smoothest, whitest ceiling tile ever: ROCKFON® Blanka™.

A perfectly white ceiling is what architects want, but has been difficult to attain without sacrificing other crucial technical properties – until now. ROCKFON Managing Director, Anders Juhl Thomsen explains why they’ve developed a visibly whiter tile:

“To take suspended ceilings to the next level, we asked our customers what the ultimate improvement would be to them. The architects said they want a ceiling that combines aesthetics – especially whiteness and smoothness – with technical performance, such as fire resistance and acoustics. Installers and building owners look for simple installation and a long lifecycle. Choosing a ceiling shouldn’t be a trade-off between properties, so we decided to create a ceiling that delivers it all in one tile.”

The solution to achieving a whiter than white ceiling was literally out of this world. By applying a specialist coating sourced from the US space industry to a high performance stone wool core, ROCKFON® has developed an incredibly durable, matt ceiling tile that is visibly smoother and significantly whiter. The ultra-white ROCKFON® Blanka™ tiles have outstanding light reflection and light diffusion properties to maximise the uniform spread of natural light. Independent tests show that ROCKFON® Blanka™ has a light reflection index above 87% and an L Value of 94.5+, which makes it their whitest ceiling tile ever.

Thanks to this unique coating, the ROCKFON® Blanka™ tiles have a smooth surface that allows for easy installation because the tiles are patternless and can be installed in any direction, saving time and reducing waste. Surface durability tests rate ROCKFON® Blanka™ top of its class. The anti-static properties of the coating make ROCKFON® Blanka™ resistant to site dust and the tiles are easy to wipe clean with a damp cloth. The tiles are designed to be hard-wearing and can resist up to 100% relative humidity without losing their shape.

ROCKFON® Blanka™ delivers all the unique stone wool performance characteristics you would expect from ROCKFON including outstanding acoustic performance and fire safety properties. ROCKFON® Blanka™ tiles are produced from up to 42% recycled materials, are fully recyclable and come with a 15 year warranty to ensure building owners a long product lifecycle.

The ROCKFON® Blanka™ range is available in ceiling tiles for sound absorption and sound insulation as well as a complimentary wall panel range; all in a variety of sizes and edge details to provide architects with complete design freedom.

For more information about ROCKFON® Blanka™, please visit www.rockfon.co.uk.

/by

Panasonic unveils state-of-the-art digital controller

Panasonic has launched its latest controller, an innovative and easy to use interface that offers full functionality with an integrated schedule timer and system controller, making managing heating and cooling systems easier than ever before.

Marc Diaz, UK & Ireland Country Manager comments “This new Panasonic control system, the CZ-64ESMC3, is a significant step forward not just in the functionality it offers, but also in how the user actually operates the system. The new controller features a digital screen and large, simple buttons making it much easier to use, so that even those without experience of heating and cooling systems can operate them and achieve the best solution for their needs.”

The CZ-64ESMC3 will be available from November 2015, and includes Panasonic’s popular schedule timer, which gives users full flexibility over when they want their property heated or cooled. Users can adjust the system for holidays, pausing operations for long periods of time so that energy isn’t wasted heating/cooling an empty home or office. The controller also allows six operations per day to be programmed, including operating or stopping units, and allowing or prohibiting access by individuals. This again ensures that the system is run as efficiently as possible, and that disruption is not caused by unauthorised individuals making frequent changes to operations.

In the past, simply having a schedule timer would not have been sufficient, as it could not control the operation mode or temperature setting, and would have required a separate system controller. However, this new solution integrates these functions, removing the need for more than one controller. By bringing the schedule timer and the system controller together into one easy-to-use unit, installation is simplified, reducing the amount of wiring needed and the complexity of the system.

With the integration of the system controller the user has much more control over their heating and cooling rather than simply setting a schedule of operation for the system. The user can allocate up to 64 units into zones, and then divide the zones into groups, allowing them to control up to 64 individual groups. Settings within each group can then be controlled such as operation mode, fan speed and air flow direction, creating a totally flexible heating and cooling system.

By integrating the schedule timer and system controller into an advanced unit with a digital display, Panasonic has made operating and controlling heating and air conditioning much easier, ensuring more efficient and effective systems.

For more information on Panasonic’s range of control systems, please visit www.aircon.panasonic.eu.

/by

Realising the design potential of Tilebrick

Ibstock, the UK’s largest brickmaker, has launched a new guide for its innovative Tilebrick range to showcase both the creative and contemporary designs achievable and provide specifiers with greater insight into the unique portfolio.

As well as examples of stand-out projects which incorporate Tilebrick – a novel brick which can simulate a traditional tile-hung wall elevation as well striking contemporary facades – the guide includes a step-by-step section, providing effective application advice and tips.

In addition, it provides a detailed breakdown of the technical aspects of the range, outlining the new profiles available. These include Planar, which gives a crisp and defined finish, Banded, for a strong linear definition and Curved, which delivers a more traditional finish with a softer appeal. Measurements and the wide range of colour and texture options available are also detailed in the guide.

Tilebrick’s unique design means it can be used to provide a monolithic appearance without the visual disruption of mortar joints and can still be laid using traditional standard mortars. As such, it is contributing to the creation of original and contemporary architecture across the UK.

The Tilebrick is supported by a range of accessories to satisfy any design requirement, details for which can also be found in the new brochure.

Andrew Halstead-Smith, Group Marketing Manager at Ibstock, comments “Thanks to its flexible design capabilities and ability to give a new dimension to facades, Tilebrick is proving to be an increasingly popular range. The new guide has been developed so that specifiers can explore the portfolio’s full potential and confidently specify this innovative brick product, knowing it can bring any architectural vision to life.”

For more information and for a copy of the new guide, visit www.ibstock.com or call 0844 800 4575.

/by

Fabric First Principles – Delivering Optimum Performance

With rising energy costs and a growing requirement for more energy efficient homes and commercial buildings, Fabric First principles are now being widely adopted, particularly within the structural timber sectors.

For the last decade innovators in the construction sector have been developing solutions to address areas of thermal bridging which occur when there is a gap between materials and the structural surfaces. By improving the airtightness of the building fabric and the thermal performance of the structure – cold bridging can be eliminated and thermal performance enhanced – reducing heat loss, carbon emissions and ultimately, offering vast savings on energy consumption.

Numerous technologies looking to maximise offsite manufacturing, have embraced the Fabric First building principles, are now gaining traction with the end users – home owners and developers – particularly in the self-build, education, health care and social housing sectors, where sustainability and ‘whole life costs’ of the building are crucial to the specifying decision process.

The latest technologies will be on show at the Fabric First Event, being held on 18 November 2015 at the Inmarsat Conference Centre, 99 City Road, London, EC1Y 1AX. Tickets cost just £95+VAT and include entry to the conference and exhibition, plus lunch and refreshments throughout the day.

The event brings together distinguished and pioneering speakers from a broad spectrum of the industry drawing upon their considerable experience to deliver a comprehensive programme of policy and regulation presentations, technology and project case studies.

Speakers include:

  • Steve Hornblow – A2 Dominion
  • Douglas Drewniak – Bio Regional
  • Ian Loughnane – Kingspan Timber Solutions
  • Christopher Jofeh – Arup
  • Shaun Fitzgerald – Breathing Buildings
  • David Alderson – Climate Energy Homes
  • Paul Rogatzki – Hanson Group
  • Stewart Dalgarno – Stewart Milne
  • Gordon Evans – YOOP Architectural Practice
  • Ross Holleron – Zero Carbon Hub
  • Jon Bootland – Passivhaus Trust
  • Alasdair Donn – Willmott Dixon

To book your place, simply go to: www.fabricfirstevent.co.uk/book.

/by

Interior Film – refurbishment made simple

Interior Film from David Clouting Ltd is a self-adhesive, decorative film designed for a wide range of applications where speed of refurbishment is often time critical.

Interior Film can be applied to almost any surface including: wood, metal, plaster board, plastics and melamine. This enables walls, doors, furniture, skirting and architrave to be quickly transformed with minimum disruption and at low cost.

Features & benefits:

  • Safety – Self-extinguishing when tested for flammability
  • Application – no air bubbles
  • Durability – resistant to impact, abrasion and scratching
  • Stability – remains stable when exposed to heat, cold and humidity
  • Flexibility – can be adhered to complex shapes and curves
  • Economical – rapid installation, easy to repair or remove
  • CE Certificated –specify with confidence
  • Manufactured – by LG Hausys

Available in a range of designs and finishes including: Exotic woods, Leather effect, textured metals and Natural stone, the Interior Film range is also available to view on the BIMSTORE website.

For more information please visit www.davidclouting.co.uk

/by